What I believe to be water coming out of plug 4 when compression testing 1 2 and 3

[bking507]

does anyone know the part numbers for the gaskets above and below the carb riser i cant seem to find them anywhere

 

[alldodge]

Should be able to find them in link with the motor serial number?

https://www.volvopentashop.com/epc/en-US

 

[bking507]

I've tried it says nothing can be found I need the gaskets the go on part number 3855903

 

[bking507]

Besides the plastic stickers on my head where can I find this metal tag that is supposed to be put on the motor

 

[bking507]

Sorry valve cover

 

[alldodge]

What is the motor serial number?

 

[bking507]

I was able to find all the gaskets I need through michigan motors. Now as far as doing the oil flush what is the what rating of oil should I use. I plan on doing three full changes oil and filter. First round do mmo and final change go back to quicksilver 25w-40.

 

[bking507]

I received my new manifold and all my gaskets. I was hoping to get my seloc today but its not coming till next week. My question is when I removed riser there were three gaskets on the manifold port. ONE metal directly on manifold. next was a ​

green gasket. Then the restrictor plate then another green one and finally the riser. Is there any reason that they would have done this. Manifold came with new graphite one ​

but I ordered two vp gaskets just to be safe. should I just eliminate the double gasket ​