Where can I find this part? Evinrude 9.9 2 Stroke

[Newbie@boats]

Long story short I got this motor from the side of the road, played around with it, and realized I had no spark.

Ohmed out the points and realized they weren't opening just staying closed pulled the fly wheel realized that part that looks like a CAM LOBE in the pic I attached with the arrows pointing at it is missing.....So I am wondering if thats something I would be able to get? Looking at parts diagrams I can't seem to find that part....

Any help would be great!

 

[Crosbyman]

tried this site's owner or your OMC dealer ??
try AOMCI want addds ....webertize section

 

[lindy46]

What year is the motor?

 

[Newbie@boats]

I want to say its a 79..........I can try to verify 100% if you guys tell me how....I don't know much about outboards

 

[lindy46]

Should be an ID plate with a model number - need that number

 

[Newbie@boats]

I will have that for tonight

 

[lindy46]

Just checked - looks like last year for points was 1976. Cam is the same for all 9.9hp points motors: Part number 318929. About $40. Make sure there's nothing else missing like the crankshaft seal and/or bearing assembly.

 

[F_R]

I don't get it---if the cam is missing, how did you manage to take a picture of it?

 

[Bullie]

If I understood his post correctly, that is not a picture of HIS motor.

 

[Vic.S]

Long story short I got this motor from the side of the road, played around with it, and realized I had no spark.

Ohmed out the points and realized they weren't opening just staying closed pulled the fly wheel realized that part that looks like a CAM LOBE in the pic I attached with the arrows pointing at it is missing.....So I am wondering if thats something I would be able to get? Looking at parts diagrams I can't seem to find that part....

Any help would be great!

Its is shown on the crankshaft diagram along with the bearing and the seal mentioned

 

[Newbie@boats]

Yes! That's not a pic of my motor, but a pic I pulled off Google, Thanks for the help!!

 

[Newbie@boats]

Just checked - looks like last year for points was 1976. Cam is the same for all 9.9hp points motors: Part number 318929. About $40. Make sure there's nothing else missing like the crankshaft seal and/or bearing assembly.

So I would need 20/15/13?

 

[Chinewalker]

Not unless they're missing - in which case the motor would be apart, as I'm not sure the upper bearing can be removed without splitting the crankcase.

I can look - I may have the cam somewhere...

 

[Newbie@boats]

I had a pic of my actual motor on my phone and it looks as if the cam is missing and everything is intact....but before I spend the $40 I wish I knew why it went missing

 

[racerone]

Bearing can not come out without splitting the motor !!

 

[scout-j-m]

So you got this thing off of the side of the road? That's unusual to say the least.

 

[Newbie@boats]

I realize that, but I do not need to replace the bearing......

Sitting on the side of the road in a pile of garbage