Which fuel line?

[lister]

Does anyone know the difference between the two fuel lines listed here? (number 7)
http://www.mercruiserparts.com/bam/subassembly/30914/1604/110

32-815451T
vs
32-147971

Thanks

 

[alldodge]

My guess is since there were 2 different carbs used with a break by serial number, then depends on which one was used. This isn't going to help because they don't say which one works with the other. May Fun Times can assist

 

[lister]

The notes on the T says 3.0LX - 3.0
notes on the non T says the same + manifold with endcaps. Whats an endcap?
Are they talking manifolds with removable ends? I havent seen one that doesnt have removable ends. Either way whats the difference to the fuel line?? weird

dimensions looks different too but which one do I get , hellif I know.
maybe ill just use a generic flexible one or a brake line ;(

 

[Fun Times]

Yes the end caps would be if the ends on the Exhaust Manifold and Water System(One Piece Manifold) are removable or not.
Exhaust Manifold and Water System(With End Caps) 3.0L Only Item # 6 and 9.
Exhaust Manifold and Water System(With End Caps) 3.0LX

What is your engine serial number?

 

[alldodge]

End caps are removable manifold end caps.

Break lines work just fine so long as your not in salt water area

 

[lister]

Thanks, just freshwater here so maybe thats simpler and cheaper

last question as im trying to avoid making this electric pump work, what are the differences between a pump on an 84 and a 92?
Might the arm on the pump be too long and the cam might smash it as it comes around? Seems like theres a big area for it to hit

i suppose another problem might be if the correct one is an "upside down" pump and the one I have from my 84 is an 'upright' one

 

[lister]

So it seems I have a one piece manifold , so 32-815451T it is