I finally removed the melted hub from my prop. Part number on the prop is 48-88440-19 and goes into my 95 Mercruiser 4.3lx Alpha One Gen II. I couldn't find a part number on the old hub. Does the prop use a Flo Torque II hub? Thanks in advance.
I took pictures of both ends but they are too big to post. The prop has what looks like an even cylinder, unlike the flo torque which has a square type. It must use an older type of hub.
-
What Bond-o was referring to is it takes a "pressed-in" hub. It isn't one you just slip in by hand. Most of us don't have the equipment to do it and would take it to a prop shop to re-hub.
-
What Bond-o was referring to is it takes a "pressed-in" hub. It isn't one you just slip in by hand. Most of us don't have the equipment to do it and would take it to a prop shop to re-hub.
