wiring for electronic shifting 1969 55hp evinrude

[superman_56520]

Hello. I have an older motor that has electronic shifting. It is a 1969 55 HP Evinrude. I just installed this motor on my boat last summer and the wires were off on the throttle for the push button shifting. I was wondering if anyone out there knew the way to put them back on. There are three wires.<br /> I was also told that there was a special type of lower unit oil to use with the electronic shifting style motor. Is this true, and if it is, what is it?<br /> Info on the motor is as follows: <br /> Model #55973 A<br /> Serial # J06167<br /> 1969 55hp Evinrude outboard

 

[mellowyellow]

Re: wiring for electronic shifting 1969 55hp evinrude

welcome aboard Superman,<br />at the bottom of the page you'll find a link to<br />purchase the manual for the motor... all you need<br />will be in there.<br />good luck,<br />M.Y.

 

[superman_56520]

Re: wiring for electronic shifting 1969 55hp evinrude

Thank you mellowyellow, will check into it.