WIZARD 6HP QUESTIONS

[TITANPRIDE]

I HAVE A BARN FIND WIZARD 6HP MOTOR THAT IS IN EXCELLENT CONDITION. I HAVE THE MODEL NUMBER AND SERIAL NUMBER BUT CANT FIND ANY INFO ON IT.

ALSO I AM HAVING TROUBLE HOOKING THE FUEL LINE FROM THE EXTERNAL TANK TO THE ENGINE. THE PIECE CONNECTED TO THE ENGINE THAT HAS THE LINE ON THE BACK AND THE FRONT IS A QUICK CONNECT AND BUT NO NORMAL QUICK CONNECTS WILL GO ON IT. I WANT TO BE ABLE TO POSSIBLY CHANGE IT TO TAKE AN OMC CONNECTOR WITH THE ONE PIN.

 

[brim_buster]

We cant help you without the model or serial number. Please post it

 

[TITANPRIDE]

MODEL # COC6506A76
SERIAL # 1086

 

[brim_buster]

Made by Chrysler in 1967. Should be a 2 cylinder

 

[brim_buster]

 

[TITANPRIDE]

Made by Chrysler in 1967. Should be a 2 cylinder

ANY IDEA WHERE I CAN GET PARTS FOR IT

 

[brim_buster]

What are you hunting? A carb kit? The first thing you do is check compression. Then spark. Then fuel. If you have all that then see if its pissing water. Thats how I proceed.

 

[TITANPRIDE]

THE ENGINE LOOKS LIKE IT HAD NEVER BEEN USED. I PUT SOME FUEL IN A SPRAY BOTTLE AND SPRAYED INTO CARB AND IT STARTED RIGHT UP. THE WIRES AND CONTROLS ARE ALL ORIGINAL AND SPOTLESS. EVERYTHING WORKS ON THE TOP FLAWLESSLY. EVEN ALL DECALS AND PLACKARDS ARE ON THE COWL IN NEW CONDITION. I HAVE YET TO DO THE WATER TEST, THATS NEXT.

THE PART I WAS LOOKING FOR IS THE FUEL QUICK CONNECT. THE 3/8 FUEL LINE IS CONNECTED TO THE BARB AND THE FITTING SCREWS IN FROM THE OUTSIDE ON A HANDLE BELOW THE COWL. 1/4 MALE THREADS AND STICKING OUT ONCE SCREWED IN IS A QUICK CONNECT MALE, IT IS SHORTER AND SMALLER THAN STANDARD QUICK CONNECTS. NO BOAT SHOP AROUND HERE HAS ANYTHING LIKE IT

I HAVE TAKEN IT OFF AND USED A 3/8 TO A 5/16 BARB AND CONNECTED THE FUEL FROM MOTOR TO FUEL LINE TO EXTERNAL GAS TANK. THATS JUST SO I CAN HAVE FUEL TO USE ENGINE. IT WORKS FINE BUT I REALLY WANTED THE ORIGINAL QUICK CONNECT PIECE TO ATTACH FUEL LINE FROM TANK TO IT.

 

[brim_buster]

send me a pic

 

[brim_buster]

Ive converted a bunch to OMC

 

[TITANPRIDE]

 

[brim_buster]

Now that I re-read your post you need to adapt and over come. Probably wont find anything if you do its either Ebay or random searching

 

[brim_buster]

Eska outboards had the same set up

 

[brim_buster]

I run a straight line to the carb with an in-line fuel filter and by-pass that crap. At least your motor will run

 

[TITANPRIDE]

I run a straight line to the carb with an in-line fuel filter and by-pass that crap. At least your motor will run

YES, THATS WHAT I DID