I need some help with a yamaha 115 115TLRA It has a oil tank on motor and a reserve in the boat,
Alarm sounds and goes in limp mode with both Bottles full.
- checked oil tank sensor on motor, 4 wires, Ground, White, brown, and red.
ground is grounded,, sensor works according to plan, with float at top, white is grounded, No oil pumped, float at middle - brown is grounded and remote oil tank turns on, when sensor at bottom, alarm sounds and remote oil bottle turns on, float works fine both manually and when in oil moving easily from top to bottom.
here is my problem, alarm is always sounded when remote tank shows oil.. The remote tank sensor has a black wire and a black/red, black verified grounded, when sensor goes to bottom, no alarm ( as motor bottle still has oil) and no oil pumped to motor, however when sensor is lifted to the clip, ( showing remote bottle has oil) the red/black wire gets grounded as it should and oil pump turn on to fill motor bottle, but alarm sounds and engine goes into limp mode. I replaced the sensor with a new yamaha parts and no changes.
My only issue is that when remote bottle oil sensor is up ( indicating oil in remote bottle) it works as should to pump oil when commanded from engine tank,, but alarm sounds immediately and puts boat in limp mode. Wires to and from harness all look good, no corrosion or shafing that I can see, motor looks all original and wiring not messed with,
thankyou for your help with this.
Alarm sounds and goes in limp mode with both Bottles full.
- checked oil tank sensor on motor, 4 wires, Ground, White, brown, and red.
ground is grounded,, sensor works according to plan, with float at top, white is grounded, No oil pumped, float at middle - brown is grounded and remote oil tank turns on, when sensor at bottom, alarm sounds and remote oil bottle turns on, float works fine both manually and when in oil moving easily from top to bottom.
here is my problem, alarm is always sounded when remote tank shows oil.. The remote tank sensor has a black wire and a black/red, black verified grounded, when sensor goes to bottom, no alarm ( as motor bottle still has oil) and no oil pumped to motor, however when sensor is lifted to the clip, ( showing remote bottle has oil) the red/black wire gets grounded as it should and oil pump turn on to fill motor bottle, but alarm sounds and engine goes into limp mode. I replaced the sensor with a new yamaha parts and no changes.
My only issue is that when remote bottle oil sensor is up ( indicating oil in remote bottle) it works as should to pump oil when commanded from engine tank,, but alarm sounds immediately and puts boat in limp mode. Wires to and from harness all look good, no corrosion or shafing that I can see, motor looks all original and wiring not messed with,
thankyou for your help with this.
