YAMAHA 150 PRO V

[musky hunter]

hI THERE GUYS, I HAVE A YAMAHA 1995 PRO-V 150<br /> ENGINE IS IN MINT SHAPE, BUT I HAVE A QUESTION<br /> WHEN I SPIN THE PROP IN NEUTRAL I HEAR A GEAR OR CLICKING NOISE, IS THIS NORMAL FOR LARGER ENGINES? OR IS THERE A PROBLEM WITH THE LOWER UNIT?? tHANKS

 

[rodbolt]

Re: YAMAHA 150 PRO V

hello<br /> double check the link adjustment at the stbd side of the power head.<br /> if its off just a bit the clutch dog will tap on the gear and make a clicking sound.<br /> good luck and keep posting

 

[musky hunter]

Re: YAMAHA 150 PRO V

Thanks Rodbolt, how do you adjust the linkage? Is it a cable setup that you can tighten or looses and hear the noise go away? Thanks

 

[musky hunter]

Re: YAMAHA 150 PRO V

Originally posted by rodbolt:<br />hello<br /> double check the link adjustment at the stbd side of the power head.<br /> if its off just a bit the clutch dog will tap on the gear and make a clicking sound.<br /> good luck and keep posting

Rodbolt,how do you adjust the linkage? Is it a<br />cable that you can physically move and hear the click go away? Or how do you do it? Thanks

 

[rodbolt]

Re: YAMAHA 150 PRO V

hello<br /> mmmmm<br /> its difficult to explain. some shift slide have a mark for nuetral some did not.<br /> the adjustment is made by removing the plastic fitting from the shift slide and screwing it in or out.<br /> the object is when the control box is shifted to nuetral the cable moves the shift slide to the center of the gear case nuetral.<br /> good luck and keep posting