I lost my boat key. So I stuck a srew driver in the switch to try to turn it. I heard a tiny crack. I went to a yamaha dealer and got a new key for the switch. The 3 number on the key match the 3 number on the switch. Went home assemble my control box back togather.
I had to disassemble it to get to the key switch 3 number. stuck the key in and turn it. Now my engine wont start at all. It seem like I'm not getting any power to the ignition switch. I check all the wire on the switch they seem to look fine. Is there any way to check if the ignition switch is bad. Or should I replace the ignition switch? I also try to start my engine manully by jumping the 2 red wire on the starter relay. The engine crank but wont start. Could that cause some damage to the starter relay or relay assemble?
1997 90hp yamaha
Thanks
I had to disassemble it to get to the key switch 3 number. stuck the key in and turn it. Now my engine wont start at all. It seem like I'm not getting any power to the ignition switch. I check all the wire on the switch they seem to look fine. Is there any way to check if the ignition switch is bad. Or should I replace the ignition switch? I also try to start my engine manully by jumping the 2 red wire on the starter relay. The engine crank but wont start. Could that cause some damage to the starter relay or relay assemble?
1997 90hp yamaha
Thanks