FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
1989 200 h.p. yamaha with only a click in the trim motor , the trim works intermittently less often than not. Can the top of the trim motor be opened with the possible intention to replace any parts, the trim motor sounds strong when it engages.
probably the relays are the problem, not sending the voltage to motor.
A volt meter will help find out if the pos and/or the neg is getting to motor leads to make it run
but the brushes could be a problem if relays are making connection like they should
Thankyou ,can the trim motor be rebuilt while boat is still in water via unbolting the top cap of trim motor,looking to extend season before boat comes out.
test to see if motor is the problem 1st, disconnecting motor leads from relay and then touching them to battery + and - , and then reversing the polarity will tell you if motor works in both directions.
I would think T&T motor is too close to water to remove while boat is in water
