Latest activity

When dealing with a lot of grease, I use those cheap, disposable nitrile gloves. For packing, I put grease into the palm of the glove...

trust me, I tend to agree with you.... its just for millions of folks that dont have a choice but to live in a metropolitan area, HOA's...

My spindles do have zerts, but, doesn't that just take grease to the inner bearing?

I just did the brakes on my Tri-axle trailer. In doing so, I also took a look at the bearings. some are better than others. On the...

Many times the heat coming from the bearings is actually coming from the brakes. Might need to replace the brakes, or any of it's parts...

Are you sure you have the fuel delivery hose attached to the correct tube on the carb .....wouldnt be the 1st time Ive seen the fuel...

I suppose its all about the cost at the checkout counter..

Hey guys. I figured making a new thread would be best. I have a 1996 90HP evinrude. Just replaced the two coils and new spark plugs...

It’s quite possible the races is not seated. From the procedure below: Use a torque wrench to tighten the adjusting nut to 50 ft...

The carpet did come up rather easily. Grabbed the corner with channel locks and pulled it up. It was soaked and dripping muddy water...

They call them crampers for a reason.

A former Forest River engineer and the XRF gun verifies the frame is 1010 mild steel. Not even A500. It was also verified that since...

Always staycation. I'm a **** in, my idea of fun is staying home and doing what I want. Of course, right now I'm waiting at my...

SS replacements available from Hardin Marine Just got mine and there remarkable. Something I should have developed,

Jut got a second one from the scrap heap. fully functional, good fuel pressures .clean fuel filter and mesh screen,unit cost $1600...