Latest activity

And good eatin!

Yeah, they're not this years batch....

This made for good morning

Using AI is about like asking folks on a forum, some know some don't know, adding AI in the mix without checking if it's actually...

Are you saying that because perhaps there is no standalone ground wire? I am not aware of any R/R that does not have a ground of some sort.

Sweet fish!

This made for good morning

Turns out they are completely different. I'm hearing that 1996 in boat talk is 1995. I was aware it was pre Vortec, but I thought they...

Thanks for that. Never a dull moment in this project. I'll pull a couple more and see what I find. Can I clean the valves and lap them...

Yeah , thats what I think too again Yeah , but if one part of a winding is down to earth there would have to be another earthing point...

Felpro and Mahle both sell seals and gaskets every day, nearly everywhere If your motor has 8 intake manifold bolts, the motor is a...

So my outboard is a 1978 Johnson 140. Came with the smaller standard rectifier. Well in my figuring out the tach issue I found my...

I do not believe that a stator will be damaged, if not connected to the VR or some load. In that case the stator is an open circuit...

I do not believe that a stator will be damaged, if not connected to the VR or some load. In that case the stator is an open circuit...

Yes that can happen but at a 60vac output from the coils .....well if it takes only 60v to push thru the insulation it pretty much...