Latest activity

:LOL:

Went out with the wife today. Could be the last time this year....

there should not be so much side to side wobble on the float to snag on thepump body edges. make certain your gasket do not cause...

Yes I did, the float works properly. Thank you for your advise.

Assembly 42 is as shown on my carb. Washer 47 is installed. But my float is " loose " as in wobble from side to side. I was thinking...

I'm reading that finding a balanced fixed setting is good enough. This will be a fishing boat. No water sports.

Why , what did she do ?:LOL:

Rib eye beef steak is hovering around $50/kg here ( supermarket )

4 bucks each here

I've been digging into this and cleaning things up. As mentioned earlier, it has good compression - 130+/- at each cylinder...

Then I looked up on Mercruiser Parts Drawings and by serial number, and it seems they use the the same part number, #17339 and says they...

Went out with the wife today. Could be the last time this year....

Stupid....

I just searched how long they were and 181 is 7.192 and the 064 is 7.182. Diameter is 0.312 on both. Are we thinking I'll need to go...

Here in TX we get 4 of those thick center bone in cut from HEB for about $8.50 :)