alpha shift cable install two grommets? ?

[kramerpage]

Read the #6 manual and cannot find the instructions for these two items. OEM merc lower shift cable kit. # OC735235 gimble. Thanks guys

 

[Watermann]

The nylon insert that goes in the the transom assembly to protect the shift cable sheath. Part # 14705 for my Alpha One. Not sure about the long one in the pic.

 

[Bt Doctur]

except you can install it without pulling the engine

 

[kramerpage]

except you can install it without pulling the engine

Assembly is on bench BD.
When u say transom what do u mean? Engine plate?gimbal housing interior exterior? Thanks guys.

 

[Bt Doctur]

 

[Watermann]

The nylon insert goes in the hole where the shift cable enters the outer transom assembly and passes through into the inside of the boat. The transom assemblies are the 2 halves that bolt together with the transom in between them, there's the inner and outer assembly.

 

[Watermann]

Part 13 is the nylon insert on this diagram.

 

[kramerpage]

Got it guys thanks. I will chuck the long one in the trash. Letting bellows glue dry overnight so I can tighten clamps a little more.

 

[Watermann]

Some of the A1 Gen II diagrams shows the long one in the outside assembly.