River Pete
Cadet
- Joined
- Jun 9, 2023
- Messages
- 17
Good afternoon all. New guy here and new to these boats (but not motors and fixing stuff)
2000 Monterey 198LS with Volvo penta 5.0 GL-C (3869181), Holley 80320-2. We picked up recently from a guy who looks to have maintained it/recent refresh. New fuel lines, new cap/rotor/plugs and wires. Fuel filter appears newly replaced.
Took it right to the water just to see how it was. Fired right up, ran for about two minutes, sputtered and won’t restart. Doesn’t appear to be getting fuel. Previous owner said it used to sputter out after a few minutes of idle and he would let it sit for 30 then it would fire up again and be fine.
Gonna test everything and just want to make sure I am not missing anything -
-gonna bench test the fuel pump and make sure it is pumping (relay contacts were decent but ordered a new one just cuz)
-gonna pull and replace the fuel filter just cuz I need the piece of mind
- if that doesn’t work and no fuel getting through , Gonna pull the line and check the pick up and anti-siphon valve
-if all those check out, gonna see if she runs on starter spray and go after the carb.
(Is there a screen filter or anything on the line in at the carb?)
Anything else I need to check before or during?
Thanks for the first (of probably many) request of help -
2000 Monterey 198LS with Volvo penta 5.0 GL-C (3869181), Holley 80320-2. We picked up recently from a guy who looks to have maintained it/recent refresh. New fuel lines, new cap/rotor/plugs and wires. Fuel filter appears newly replaced.
Took it right to the water just to see how it was. Fired right up, ran for about two minutes, sputtered and won’t restart. Doesn’t appear to be getting fuel. Previous owner said it used to sputter out after a few minutes of idle and he would let it sit for 30 then it would fire up again and be fine.
Gonna test everything and just want to make sure I am not missing anything -
-gonna bench test the fuel pump and make sure it is pumping (relay contacts were decent but ordered a new one just cuz)
-gonna pull and replace the fuel filter just cuz I need the piece of mind
- if that doesn’t work and no fuel getting through , Gonna pull the line and check the pick up and anti-siphon valve
-if all those check out, gonna see if she runs on starter spray and go after the carb.
(Is there a screen filter or anything on the line in at the carb?)
Anything else I need to check before or during?
Thanks for the first (of probably many) request of help -