Please help with HPDI issues

[Stilletto]

if everything is in spec but still running too rich, then you may need to try another ECU

did you have the injectors tested/cleaned and make sure they are the correct ones

I sent the injectors to Brucatos. He said that they worked and flowed correctly, and replaced the orings. They did mention that one had a short in it, which they hadn't seen very often, but that it disappeared after cleaning. Mentioned that could be caused by injector driver or could just be a fluke since it disappeared.

 

[Stilletto]

Anybody familiar with the crank position sensor and the pulser coil? I checked the timing with a light, the timing was rock solid in neutral but as soon as i put it in gear it jumps around a bit....

 

[dingbat]

Anybody familiar with the crank position sensor and the pulser coil?

Typically one and the same.

Sends crank position (pulse) to the ECU for timing purposes. Very sensitive electrical “noise”

If it’s jumping around, it’s typically a bad sensor, but a wiring problem can induce noise into the circuit as well.