way to ruin the 20 year anniversary boat day

redneck joe

Supreme Mariner
Thread starter
Joined
Mar 18, 2009
Messages
16,436
Had not splashed yet this year aka life happens. But 18/20 anniversary so thought i must take the time and make the effort life can wait a minute.

Ran the day before by myself as one should, ran usual route, she was cranky as always when cold and half warm from sitting but ran the 16ish miles fine with a three hour grill and beer stop.

Next day, wife and i load up and we run short part first to our grilling and chilling spot. Had fun, built a fire, drowned worms - the usual.

Load up for the rest of the run and head in and she sputtered a bit starting but thats normal and i usually just fast hull speed a bit to let her get back to warm then go.

Go didn't happen.

Tried everything i could think of but only get started with choke and i could sometimes keep revved up in neutral. Only thing different was a new fuel station but it is the only one in 5 miles from the ramp so has to be used often but hey, **** happens right?

That was a month ago, finally getting around to it and grabbed the other fuel tank to go fill up but before i did dico'd the lines and blew out the fuel into a glass. No water, but did have a nice varnish flake so hey i was excited. Checked the filter under the hood and a bit more so as i rinsing off i was thinking hey this is an easy fix. Check my inline and looks good as well. Well, its been a year and season is about over so might as well change the inline while i'm at it.



1790193441270.png


sucking air. didn't see until taking off the clamp.

new one in, muffs on, all good.

Missed some boating days...

Great googly moogly.
 

redneck joe

Supreme Mariner
Thread starter
Joined
Mar 18, 2009
Messages
16,436
be here wednesday.

What sucks is I do carry one with me.
 

99yam40

Fleet Admiral
Joined
Sep 7, 2008
Messages
9,360
Had not splashed yet this year aka life happens. But 18/20 anniversary so thought i must take the time and make the effort life can wait a minute.

Ran the day before by myself as one should, ran usual route, she was cranky as always when cold and half warm from sitting but ran the 16ish miles fine with a three hour grill and beer stop.

Next day, wife and i load up and we run short part first to our grilling and chilling spot. Had fun, built a fire, drowned worms - the usual.

Load up for the rest of the run and head in and she sputtered a bit starting but thats normal and i usually just fast hull speed a bit to let her get back to warm then go.

Go didn't happen.

Tried everything i could think of but only get started with choke and i could sometimes keep revved up in neutral. Only thing different was a new fuel station but it is the only one in 5 miles from the ramp so has to be used often but hey, **** happens right?

That was a month ago, finally getting around to it and grabbed the other fuel tank to go fill up but before i did dico'd the lines and blew out the fuel into a glass. No water, but did have a nice varnish flake so hey i was excited. Checked the filter under the hood and a bit more so as i rinsing off i was thinking hey this is an easy fix. Check my inline and looks good as well. Well, its been a year and season is about over so might as well change the inline while i'm at it.



View attachment 419954


sucking air. didn't see until taking off the clamp.

new one in, muffs on, all good.

Missed some boating days...

Great googly moogly.
was that a temu plastic filter?
I had one on a lawnmower do the same thing about a week ago
 

Lou C

Supreme Mariner
Joined
Nov 10, 2002
Messages
14,508
Wow it's scary the junk that they sell today!
finding good parts is the nemesis of all mechanics especially with old engines where many parts are discontinued.
Example
simple thing, an AC compressor clutch for my 2007 Grand Cherokee 5.7 V8. Same one used on 2005-2010 Jeeps, Chrysler 300s, Dodge Chargers and Challengers. Discontinued
tried 2 aftermarket ones both blew up in less than 2 weeks, same fault, the magnet won't stay in place behind the pulley so it rubs the pulley and makes a racket.
So I have to replace the whole compressor instead even though it still cools just fine.
 

nola mike

Admiral
Joined
Apr 22, 2009
Messages
6,092
(As I sit here, stranded as my trailer crossmember replacement came to a halt after my grinder failed today)
 

redneck joe

Supreme Mariner
Thread starter
Joined
Mar 18, 2009
Messages
16,436
i'm joust going to put the boat up for the year this week. Need a shaft seal and don't wanna do it myself, too much going on still with the new house so see her next spring...
 

nola mike

Admiral
Joined
Apr 22, 2009
Messages
6,092
You stranded out on the road?
No, stranded on my project! I'm in the boonies. Luckily my buddy had one to borrow (I call it Ken's hardware). I traded him for some construction adhesive. New beam is cut, painted, holes drilled. Need a couple of bolts and we'll be back in business.
 
Top