alldodge's latest activity

  • alldodge
    alldodge replied to the thread Mercruiser 350 MAG MPI.
    Probably came with AC-932 but later Merc changed them to AC 41-993 and these are Iridium and gaped at 0.060 Finding the NGK TR55IX is...
  • alldodge
    alldodge replied to the thread Lowe 185 Ski & Fish with Verado 150 – bow won’t lift.
    Don't see the weight being your current issue, just wonder why a Verado was installed other than the XS. Just looked up and the Pro XS...
  • alldodge
    alldodge reacted to Superjetjim's post in the thread Mercury V6 XR2 - Does this Stator looks bad? with Like Like.
    Been to the machine shop today, they measured it and laughed. Gave me some guidance on what to do. Got a sheet of glass, bonded a flat...
  • alldodge
    alldodge replied to the thread 1994 5L EFI Volvo penta.
    All good, starter has a solenoid The Assist relay sends power on the Yellow/Red wire down to the starter solenoid. So jumping from the...
  • alldodge
    alldodge replied to the thread Lowe 185 Ski & Fish with Verado 150 – bow won’t lift.
    Pro XS 115 weight 163kg (359lb) Verado 150 weight 231kg (509lb) Pro XS 150 weight 207kg (456lb) The vids on line do not have anyone on...
  • alldodge
    alldodge replied to the thread Electronic steering.
    My boat (OB) has electric/hydraulic steering. Has a electric motor turning a hydraulic pump, if E-motor stops it gets extremely hard to...
  • alldodge
    alldodge reacted to Boaterdan278michigan's post in the thread 1994 5L EFI Volvo penta with Like Like.
    I'll take pics as soon as I can get back to the storage facility. It's not stored at home.
  • alldodge
    alldodge replied to the thread 1994 5L EFI Volvo penta.
    I don't know which starter you have, but if it has more than one main Battery cable connection, than you should be able to jump from the...
  • alldodge
    alldodge replied to the thread 1994 5L EFI Volvo penta.
    If your jumping the assist (slave) relay and nothing happens than it's probably the relay If your jumping the starter solenoid mounted...
    • VP Fuel Pumps.JPG
  • alldodge
    alldodge replied to the thread Finally. Some warm times..
    Yesterday morning not bad Buddy came over and had the shop overhead door open and having a couple beers around 1PM (60*). By 2:30 temps...
  • alldodge
    alldodge replied to the thread Looking for alignment tools.
    Search Mercruiser alignment tool, many sell them. They work on Merc, VP and OMC Dimensions of tool
  • alldodge
    alldodge replied to the thread Mercruiser 350 MAG MPI.
    With it being a reman motor the serial number won't be there. What year is the boat? Jason does bring up a good point about checking...
  • alldodge
    alldodge reacted to JustJason's post in the thread Mercruiser 350 MAG MPI with Like Like.
    The appearance of an engine running rich can be caused by low engine compression. Before throwing money at this, check the compression.
  • alldodge
    alldodge replied to the thread 2003 150 Sport - Old DECALS / STICKERS?.
    Welcome Don't know for sure but with the boat not being that old, you should be able to contact Whaler Whaler
  • alldodge
    alldodge replied to the thread Mercruiser 350 MAG MPI.
    What is the serial number? The cam sensor can be replaced but right now I don't see it as causing excessive fuel. This that can cause...
Show older items
Top