Search results

  1. 73 Dolphin

    My new 1974 21' Starcraft cc conversion !

    I just bought home my new Starcraft 21' cc conversion. It spent most of it's life on Lake Erie and was bought down to Florida a couple of years back. It has the 165 mercruiser straight six. When the gimbal bearings went the owner pulled the outdrive meaning to repair but it just sat to the point...
  2. 73 Dolphin

    pre alpha one advice ( is it good), ratios.

    I bought a boat with a 165 merc and pre alpha outdrive. the outdrive was off the boat, in pieces inside a wet trash bag. Then I bought a donor boat 140 merc also with a pre alpha outdrive. I wanted it for the drive and trailer. the motor is siezed. I pulled the drive off the donor boat and...
  3. 73 Dolphin

    merc 165 inline 6. About to buy..should i ?

    Looking at a boat that was "ran just last year" it has a 1973 merc 165 inline 6. When he removed the engine cover and air filter the carb was full of water. He then promptly hit the throttle and after a bit of messing managed to dump the water into the carb throat ! He connected as battery and...
  4. 73 Dolphin

    Getting trailer title from old tag?

    Maybe you can help me out. I bought a boat and trailer - the boat had a title .The trailer did not. However the boat had in it an old tag ( exp 2000 ). It could have been for the trailer. Is there a way to run the tag number free of charge to check if it was for the trailer? I wouldn't expect...
  5. 73 Dolphin

    connecting new steering cable to motor...

    I have a force 125 motor and just installed a new complete NFB teleflex steering system to the boat. The OLD cable was rack and pinion and where it connected ( thru the splash well ) there was a spring loaded end that allowed you to snap on to the tiller ball mount and the sleeve sprung back...
  6. 73 Dolphin

    Dry riverbed gelcoat topside and more.....

    I just picked up a 1964 18' Lyn-Craft / Seebreeze with an 85 horse mercury outboard. The guy advertised it as motor with free boat. I had the option of just taking the motor or the whole deal. I chose to take the whole deal. Why I did that was to use it to practice stringer repair as it is much...
  7. 73 Dolphin

    Starter not starting force 125

    I have read some posts on the forum regarding starters that do not start. I WILL clean all connections etc, but just in case there is another problem....this is what's happening. Motor used to start first time no problem. Sat one month then nothing but a buzz and or click from starter. No...
  8. 73 Dolphin

    175 sportjet starting after sitting a year.

    I have a Sugar Sand Tango with a Mercury XR2 175 hp sportjet. It has been sitting for over a year. When i try to start her the starter solenoid clicks but nothing else happens. If I bridge the contacts - the same.The battery is at full charge and of course the water is connected. So the...
  9. 73 Dolphin

    Any experience of Dolphin boats from 70's?

    Hello. Does ANYONE have any experience with Dolphin Products boats of Clearwater Florida? The company is now out of business - so not the Dolphin boats out there now. What I have is a 1973 Dolphin 20' bow rider. I have read the most of the posts on restoration and realize that I need to...
  10. 73 Dolphin

    vote for the worst designed part.

    My vote goes to the tilt ram on the Force 125 motor. Why thread a receiver for the hydraulic line when you can use a tension ring and a countersunk receptor hole!? Fantastic bit of design.Get the alignment slightly wrong and pop goes the ring and now you are ...well...not in good shape. Of...
  11. 73 Dolphin

    from the grass to a trailer ... help!

    What is the best way to get a boat from off the grass and on to a trailer? It has two 4x4s under the jet drive and landscape lumber under the bow. Wieghs 1400 lbs. Thanks !
  12. 73 Dolphin

    What's under my spongy deck ?!!

    So i went and bought a 1973 Dolphin Bow rider. The price was right as it has a running 125 Force and a twin Axel aluminum ez-loader trailer in great shape with good tires and no rot. And as i new nothing about boats - it was perfect! The guy who sold it to me kept saying " it is what it is"...
  13. 73 Dolphin

    Thoughts on installing tilt/trim to 125 force

    Here's the situation.I bought a "73 Dolphin Bow rider with a Force 125 outboard. The guy before me had installed a non standard trim motor (different mounting bracket,but motor and hoses the same) , mounting it on an aluminum bracket behind the transom. At some point is corroded out and the top...
View older results
Top