Search results

  1. rcl700

    How to remove

    What do I bolt to or chane to to remove my 90hp? ( if using an engine lift) Is there a safe place to strap or hang the motor from safely?
  2. rcl700

    water in the lower unit agin (tohatsu)

    Okay I posted earlyer that I had found water in the lower unit of the motor I had traded. well I drained the water/oil out an flushed with oil then refilled unit. well I ran the motor at the lake a few days ago to test the lower unit. It worked but now checking the oil there was water in it...
  3. rcl700

    TLDI tach lights flashing ??

    2004 Tohatsu TLDI 90hp What does it mean when all three lights located in the tach (water,batt,oil) are flashing while the motor is running? there is no buzzer sounding.:confused: Can this be reset? If so how?
  4. rcl700

    replacing bunks

    well i need to replace the bunks on my trailer. is there special carpet that go on them or can I use indoor/outdoor carpet from home depot to cover? do you glue the carpet or just staple it? thanks for the help guys!
  5. rcl700

    tohatsu trade trouble

    well I think I my have got shafted. I traded a boat with a guy the other day he cranked his motor sounded good I cranked mine sounded good. We do the trade. I crank it up the next day at home w/ muffs and put it in gear:( this thing does not sound good. it does shift forward and reverse but has...
  6. rcl700

    fiberglass pontoon quststions

    I'm looking into a used fiberglass 20' pontoon. w/ 90hp I would like to know the pros & cons of fiberglass toons. your thoughts on them. what problems to look for when i go check it out. It is gutted inside so I would be able to set up how ever I like ie. seats,tables. Thanks for your...
  7. rcl700

    91 johnson hard start 25hp

    I have a 25hp johnson that has a hard time starting. I have to take the cover off and spray some intake cleaner to get it going. once it has warmed up it will fire up no problem. the carb was rebuit runs smooth just hard to get it warmed up/ cranked any thoughts???
  8. rcl700

    johnson 25hp

    how hard is it to change the impeller on a 1991 johnson 25hp? iv got the part just not suer about doing the job. has week water presure at idle. i have a carb kit to put on also. I think that im going to try some sea fom first.
  9. rcl700

    what to seal with

    I have some deck lid covers that i have made up out of wood. these covers go over the storage boxes and rod holder box on my boat.My question is what or how should i seal these so that they do not fall apart? will primer and oil baised rust o lium work?:confused: should i paint resin on first...
  10. rcl700

    deep Scratches /chips- Marine-Tex

    What is the best way and easyest way to fix deep Scratches and chips in the bottom of my boat??:confused: the fix doesent have to look perfect its a fishing boat. i found some stuff called Marine-Tex . does anyone know about this stuff??
  11. rcl700

    rust-o-leum marine top coat

    has anyone used the rust - o leum marine top deck paint?? thoughts on this stuff? i found it for 8.99 a ct.+ shipping is this stuff any good for fiberglass?:rolleyes:
  12. rcl700

    deck lids? seal/cover/hinges?

    i have some wood lids that were mave up for the storage areas in my boat. (ie. rod compartment.)that have not been covered with anything yet.im planing to paint the top deck of the boat with rust oleum marine coat should i use the same stuff on these? how should i seal them? i dont have any...
  13. rcl700

    cheep paint

    my boat is fiberglass inside is like a wet deck. there is no carpet at all .it is covered with some kind of non skid flat grey paint. i have been doing a lot of fiberglass repair in the boat and will need to repaint inside to make everthing uniform.What kind of paint can i use? is there anything...
  14. rcl700

    livewell drain

    ok im very new to all of this. I just picked up a 14'' fiberglass fishing boat this week. it has a 25hp johnson.My question is about the live well in the boat. The live well goes all the way to the very bottom of the boat it is a fiber glass sealed in box.it has no over flow thru hull and no...
View older results
Top