Search results

  1. S

    key switch wiring for 1977 85HP javilen (johnson)

    looking for the wiring schematic for this motor to put a key start on it Thanks
  2. S

    1977 402 re-wired only spark to 1 cylinder

    only getting spark to 1 cylinder after rewire which is good since I had 0 spark before. is there a way to use a Ohms to check stator or trigger? Thanks
  3. S

    1969-70 80 hp mercury Idling issue

    Its almost like its dropping a cylinder at idle . Ive checked timing, done a link and sync, rewired the complete motor, compression is at 150 on all 4 cylinders, I have not looked at carbs yet but they seem o k. Ideally would love this thing to purr I also put a new impeller in it does not...
  4. S

    25hp mariner missing ignition parts baffeled

    anyone know what I'm missing? or have schematic for this motor I believe its a 1994 or 1996 according to serial # thanks
  5. S

    1979 65hp Evinrude peters out underload Baffeled

    rebuilt carbs, checked all electrical componets, will idle all day with a slight miss then ou will hear it kick and run smooth etc acts like electrical but has good spark on all 3 cylinders, compression is even at 150 all the way down put it in gear and act like not firing on all 3 just peters...
  6. S

    94 25HP mariner whats missing here?

    bought as is. anyone see whats missing besides flywheel I have that thanks is there a trigger or something.
  7. S

    year of this mariner OD215849

    need to figure out what ignition parts its missing bought it apart (flywheel off) seems like its missing a trigger or something I can grab a pic if someone is will to let me know what its missing Thanks
  8. S

    Strange electrical issue w/ 88 40hp mariner

    When I plug in controls and turn key starter does not work and wiring heats up, but does not blow fuse something must be grounded?? model # 40 O EL serial # 420625 anyone been through this? I also have a OD 215849 25hp American made Mariner , I need a scamtic on Ignition wiring seems to be...
  9. S

    Cant get trim tab removed on 402 nut is off

    baffling can turn trim tab but it wont drop off to get to the bolt to drop lower unit any adivce??
  10. S

    whats a fair price for 85 115hp merc

    it has 140 per cylinder has been garaged for 3 years comes with controls power tilt factory paint new prop Live in Oregon
  11. S

    76 Merc (402) lower uniit

    Been trying to get that trim tab off to get to that bottom nut but she's not budging poured type c oil in the hole but no luck yet..........any suggestions thanks In advance
  12. S

    100HP Merc serial # 2682410 cant find year off this

    anyone know what year this could be Thanks
  13. S

    year of 100HP merc off serial #

    Serial # 2682410 cant seem to find it on any site
  14. S

    135psi comp on all 6 cylinders on a mid 80's 115hp merc

    I guessing this is a good reading. what do brand new ones read. there is also a oil pressure gauge on this never seen one on a 2 stroke its NOT auto oil. its going on a 85 spyder should push it along good I'm thinking
  15. S

    hoisting a 85 115hp merc

    I got this merc I want to lift out of my truck and onto a stand . I don't see a hook like on a Johnson. whats the best place to hoist it from seems like the framing around the power head feels weak to carry the load Thanks
  16. S

    200hp mariner over heat problems

    Have a 87 200hp mariner put new water pump in it will run fine until you get it up over 3000 RPM or to a plain and the over heat alarm goes off you can see discoloration on 1 cylinder possible clog ? cools right down at lower speeds its pumping water
  17. S

    75 HP Johnson Stinger figuring out the year

    model E75ELLTE serial Jo263578 its white hood says 75 in orange and has black and Grey stripes guessing 1978? instant 150 psi on all 3 cylinders :) http://forums.iboats.com/images/icons/icon7.gif thanks
  18. S

    How to get a 72 in "n"

    its the selctro shift I know you need to put power to what the purple wire? want to check comp
  19. S

    Helio coil install

    have 72 125hp evi needs helio-coil on #1 plug should I remove head or can I do it w/head on. also what size kit do I need for this thanks
  20. S

    weight of a 1972 125hp evi

    anyone know approx, and easiest way to hang from motor stand looks like Im going to need to install on the stand like on a boat install bolts? or is there a easier way. had a 85 hp Merc on the stand but it had the twist tightening style thanks in advance
Top