Search results

  1. S

    what glue to use on plywood

    what type of glue do I use to glue plywood together for transom and when I syall my first peice to the outside Glass what to I use to adhear to the glass? thanks
  2. S

    Questions on transom repair 85 16 seaswirl outboard

    I'm going to attempt to repair this transom tomorrow has anyone ever done one like this. it looks like the plywood goes all the way across on the bottom but is notched out arounf the upper housing. cna anyone help with on were I should cut off the glass from the outside? looks like I have...
  3. S

    force prop interchage with a 72 merc

    have a 72 merc found a prop that has 15 splines its off a 90's 90hp force would this fit my shaft?
  4. S

    whats the difference with the hornet motor

    I have a 72 80hp merc 4 cylinder, a friend asked if it was a hornet? what is this? how do you tell whats the difference?
  5. S

    original bore size for 1989 90 hp nissan

    can anyone tell me the original bore size for this powerhead?
  6. S

    how to by pass that oil injector

    so the casue of the power head damage is from this injector. Im going to rebuild but I want to run it premixed so this does not happen again is this possible I don't trust these
  7. S

    power head for 89 nissan 90hp

    what other nissan 3cylinder powerheads will fit on my motor. or can anyone tell me approx what it would cost to rebuild mine? I have one bad cylinder
  8. S

    90hp nissan question

    Im going to look at a 90hp nissan guy does not know year says its metalic blue and grey on cowl says nissan anyone know about what year this could be and what its worth not running and running comes with controls
  9. S

    1985 seaswirl transom repair advice

    hi guys, I have cut out my rot it goes about 1/2 down the center and approx 2' across Im wanting to use marine plywood since I feel thats the right way to do it. how do you tie the new plywood to the excisiting to restore strength to hold the motor here are some pictures any adive would be...
  10. S

    1967 centerion 16' w/120 mercruiser

    thinking about buying this boat what is good compression its a 4cylinder mercruiser 120 I also noticed it does not have power trim on the outdrive. guy said he could not get spark now he got spark and timming is off thinking it could be 180 out? says comp is at 140psi on all 4 is this good...
  11. S

    1972 80hp merc

    what is stock comp on these? I have 155 an all 4 instant trying to decide weather to run this or my 76 70hp jonson looper
  12. S

    1976 70hp looper weep holes

    were is this motor suppose to weep it has 2 holes at the top of the leg nothing have not ran it long yet it is weeping behind the gearcase
  13. S

    1976 70hp johnson looper

    NO spark issue were to start. ohms tests etc thanks
  14. S

    woodruff key for 89 85hp force

    Good morning does anyone know the size woodruff key for flywheel is? can a guy get it at a auto parts. last one I bought was $10 at the marine shop. my model # is 856x9B the guy I bought the motor from said it was an 85 model # shows it to be an 89 a friend said I have a 85 flywheel its the...
  15. S

    New developments on the force 1985 85hp

    heres the deal, IF I swap out the #3 to the #2 I get spark from # 3 when I put #2 on the #3 cd unit I get spark on all 3 cylinders when I switch it back to normal I get the same spark on the top 2 cylinders from the Cd unit running the top 2 cylinders and no spark on # 3 from the other cd...
  16. S

    Baffeled

    I appreciate everyones help and adivce. swapped out CD unit and still no spark at #3 the strange thing is I had spark there on mon went out tues switch wires again and lost it. no when I go to start it it just sounds like a shot gun going off. checked woodruff key its fine #1 lines up on both...
  17. S

    Test procedures for ruling out spark problems

    I can't get my mind off of this issue # 3 no spark spent 12!! hours on it finally the wife convinced me to walk away for the day Ive gone though book few times and cecked and double check wiring it is correct according to selco. what test can be done to narrow the problem part as I don't want to...
  18. S

    Stator wiring to extra wire on 1985/85hp force

    this thing is driving me crazy! I don't want to through money at it. I have spark at the 2 top cylinders none at #3 I have switched connections and get spark from that # 3 coil off the other CDI. Im wondering if its my CDI that is bad or my stator. I have a good ground everything is daisy...
  19. S

    1985 85hp force

    started it today for the first time she will fire right up and then backfire and die. carbs? checked spark still have spark checked timimg its right at TDC when the mark on flywheel is at the trigger arm. any thoughts? I'm betting that woodruff key sheared I'm horrible with these it's my...
  20. S

    sorry did not realize I already posted dont know how to Delete

    going to install a new trigger on my 1985 85hp force. I looked on the fly no timming marks that I can see. also not sure were the trigger arm should sit for Idle . I put #1 piston @ TDC. is there a mark or a approx position that the trigger arm should sit at at start up thanks
Top