Search results

  1. C

    Yamaha 40hp manual tilt - will busted shallow water drive cause any issues?

    Hi all, I managed to break the shallow water drive on my Yamaha 40hp 2 stroke manual tilt (had a board in there to keep the motor up and it slipped and snapped the little steel hook/brace for shallow water drive). It still locks all the way down and all the way up. Do you think I'll have any...
  2. C

    Outboard lift assist handle/bar

    Has anyone used the outboard lift assist handle/bar on this site? Does it work ok? It looks like it might dent or crack the cowl given the force is now on the cowl where it is not intended...
  3. C

    Has anyone used an aftermarket power tilt on an open aluminum skiff with tiller?

    I'm thinking of adding the CMC power tilt to my 16 Lund SSV (tiller driven). I have a 40hp Yamaha 2 stroke. Has anyone done this? I'm not sure the effect of moving the motor a few inches back with regard to steering, boat trim and transom stress. A Yamaha power tilt is way too expensive...
  4. C

    Trailering with or without cover?

    Ok I've got my 16' open Lund SSV almost ready to go for the weekend thanks to this board. Last question - is it worth trailering with a cover? Or do they flop around and mess-up the nice red finish on my boat? The trailering cover is $150 and I'd rather not buy it if most people don't bother...
  5. C

    Does this setup need a transom saver? 40hp on Lund

    I'll trailer pretty far distances. I have a manual tilt tiller 40hp Yamaha on a 16' Lund SSV. Motor weighs about 190. Do you think I need a transom saver on this rig? Dealer said 2X4 and tie-down strap should do it (though I don't know how the 2X4 stays in there unless I don't use the tilt...
  6. C

    Please help: bilge pump mounting/system for 16' open Lund

    I have a 16' open Lund skiff with a 40hp tiller, no power other than stand-alone battery. I'm not sure what kind of bilge pump to install or how to do it. If I install a standard bilge pump, how should it be secured to the hull? I don't want a through-hull bolt! I was thinking maybe adhesive...
  7. C

    Anchor buddy questions

    A few anchor buddy questions as I've never used one: - I have a 16' Lund with 40hp - what weight of anchor should I use? Does the anchor buddy work better with a heavier than normal anchor? - How can you tell if you've set the anchor? With all that stretch it seems like it would be tough to...
  8. C

    Need design ideas - support bar for standing while steering a tiller alum skiff

    I saw a pic of a guy standing while operating an open alum tiller skiff with a throttle extension. He had a support bar for the right hand and it looked to be a comfortable position to stretch the legs. Only his support was an ugly setup bolted to the top of the seats. I want something about...
  9. C

    Help with launching etiquette

    I just purchased by first trailerable boat. I want to launch in an area with 4 concrete ramps side by side. There is no dock, the launch is often busy, and water can be a little rough. My thoughts: - Put fenders on both side of the boat in case I contact other people launching beside me -...
  10. C

    25 2 stroke: Yamaha vs Mercury SeaPro 2010, what are the differences?

    Hi all, I'm looking at near new 25 2 strokes manual tilt and pull start. What are the pros and cons of the Yamaha vs the Mercury SeaPro? I can't find any decent information on the Merc, other than it is probably made by Tohatsu. Is the Merc really that much more robust than the Yamaha? It...
  11. C

    Lund owners - beaching yay or nay?

    I'm going to be buying a 2007 SSV 16. Being riveted should I be beaching this boat? Or anchoring and letting it float out? I'm on the west coast and beaches here are small rocks and barnacles for the most part. I don't want to start popping rivets on what is now a very pretty boat.
  12. C

    Aluminum skiff vs inflatable - have you experienced both? Best overall family boat?

    I'm about to purchase a heavy duty 14' soft bottom inflatable (but aluminum floor) for a family boat. It will be for larger lakes and inlets (Indian Arm, Sechelt Inlet if you are familiar with BC). But I can also get a 14 Lund SSV for roughly the same price. More deck space and has a deeper...
  13. C

    Anyone tried a newer Honda 15hp 4 stroke on a 430? Ok or waste of time?

    I can get a super deal on a nearly new Honda BF15 - it has 4 blade prop and high displacement. Will this motor plane a 430 SIB with 2 adults and 2 young kids? I really like the Honda features and it is quiet and easy to tilt, trim, etc. Or will it be an exercise in frustration?
  14. C

    How long do plywood transoms last?

    As is obvious from my posts, still trying to pick the best of the Chinese boats. I noticed most have plywood transoms - how long do they last, especially in salt water? I can get fiberglass transom but it costs at least $500 more.
  15. C

    Anyone tried a 1.8mm SIB?

    I found a manufacturer that makes a 1.8mm PVC 430 SIB. Has anyone tried such a boat? I suspect it will be a lot stiffer than 0.9mm on the water? Thoughts?
  16. C

    Saturn: 14ft has no benches, 15ft does??

    Ok, I just realized that the Saturn boats are half the cost of Chinese PVC boats in Canada. As I'm close to the border I can have it shipped close by and drive to pick it up. With 2 adults - 2 kids I'm thinking the 14ft should be ok. However it has no benches! I called and they said it is...
  17. C

    Advantages or disadvantages of inflatable catamaran sport boat?

    As I was looking for an inflatable, I came across the Zebec Sportbug: http://www.zebecboats.com/SportBugs.htm I don't know anything about catamarans. Would be using it in sheltered ocean inlets and larger lakes. Would a traditional inflatable be a better choice?
  18. C

    Beaching a SIB?

    I'm looking at a 15' SIB with 1.2mm PVC and inflatable keel. It has a thick rubber strake down the center of the boat. Has anyone added more protection to the bottom of a SIB for beaching? I won't be folding the boat up ever. My concern is beaching, then having the waves grind the bottom...
  19. C

    Help for newbie - size and PVC thickness?

    Hi all, Graduating from a canoe to an inflatable. I'm looking at China made soft bottom boats with Mehler PVC. 2 adults, 2 smallish kids. I'm looking at a 15' with 6'3" beam and 20 inch tubes with fiberglass transom. I can't view it in person before buying. Is this big enough for 4...
  20. C

    Would you buy a rebuilt Tower of Power?

    Hi all, I need to re-power a 17' deep v glass boat for freshwater and saltwater use. The boat is rated for 105hp. I'm looking at a 1989 Mariner 115hp Tower of Power professionally rebuilt from a local marine shop for $2500 including controls. Is this the right outboard for me? I want to...
Top