Search results

  1. M

    1993 Johnson 50 high voltage ?

    Hello . 1993 johnson 50 runs well but seems to be over charging , at least according to a new faria volt meter . We have a brand new marine deep cycle battery , maintained on a battery tender . We replaced the regulator thinking that was the issue . We were ok for one day , voltage never went...
  2. M

    Michigan Wheel XHS bit loose

    I am using a Michigan Wheel vortex prop which utilizes the XHS hub adapter . After installing the prop and tightening it down there still seems to be 1/16 to 1/8 inch of play . Is this normal ?
  3. M

    What is the difference between a Johnson 50 and a GT 50 ?

    In looking to update our 1993 50 with a new paint job and decal set I saw a set GT designation. I am not familiar with that particular model. Does anyone know what the differences are between the " regular " 50 and the GT ?
  4. M

    1993 Johnson 50 power trim rebuild

    I am looking for rebuild services for the power trim unit. The unit works quite well but there is oil seepage at the top of the cylinder around the central lifting shaft. I have removed the entire assembly and was curious as to what I might be looking at if i sent it out or is it something that...
  5. M

    VRO yes or no ?

    We had small inkling when we picked up this lovely boat , motor and trailer for $ 150 that things might not be in pristine condition :) There is no thing as a free lunch but we are hoping this one won't be too expensive :) The motor is going to be transferred to this little toy and we will give...
  6. M

    VRO yes or no ?

    Here are some other goodies that seem to be doing not much of anything .
  7. M

    VRO yes or no ?

    here is photo of the hose in question .
  8. M

    VRO yes or no ?

    I recently purchased a 1993 Johnson 50 in non-working order. For the low price I knew I would be dealing with some issues. In starting to sort things out I noticed that there are some items that are used in a VRO motors such as the four pin Molex connector cable. I do not believe my motor is VRO...
  9. M

    Used enging VRO or not ?

    repost
Top