Search results

  1. P

    2000 merc 200 EFI no start/no fuel pump

    hi all, im working on a merc 200HP 2 stroke EFI motor with no start condition, (ot143331) it was put away wet last year and now would not start. the fuel pump was not running. testing with as probe i found power and no ground. during crank. when i sent negative to the (-) terminal the pump...
  2. P

    removed dpsa from gimbal & found oil in bellows

    no rust in the joints, no water in the bellows, only oil. i have not run a vac. test yet.
  3. P

    removed dpsa from gimbal & found oil in bellows

    i got the drive in the shop and pressufre tested it at several pressures and pressure has held at each level. what would you do? change out the seals in the input shaft or chalk it up to an anomoly and check it again next year?
  4. P

    replacing the inner prop shaft seal on bravo 3

    https://marinetech.com/bearing-retainer-tool-bravo-iii-91-805382t.html alternative to 2 piece
  5. P

    replacing the inner prop shaft seal on bravo 3

    so alldodge, I looked at your post, WOW, you dug deep. am i correct in thinking i need all 3 tools ? Bearing Carrier Tool (91-805374--1) Bearing Retainer Tool (P/N 91-805382) Bearing Carrier Tool (P/N 91-805374) or is there a new version of the retainer tool that does both jobs? other...
  6. P

    replacing the inner prop shaft seal on bravo 3

    thanksfor the reply guys, do i need both those tools? the book really does not spell it out too well. im unclear as to where the 2 different tools come into play. 91-805374 & 91-8053741 and the 805382 retainer tool. it looks to me like i only need the 5374 but i have never done this before...
  7. P

    replacing the inner prop shaft seal on bravo 3

    can this be done without disassembling the case? can i remove the carrier and outter shaft without pulling the driveshaft? i have found several videos on changing the outer shaft seal but nothing on the inner. when i look at the manual, it appears to all come out from the prop side. the way i...
Top