Search results

  1. S

    Evinrude 25hp outboard wants to die when I give it gas

    Send pics of fish too😆
  2. S

    Evinrude 25hp outboard wants to die when I give it gas

    Model number or at least the year if known. Most likely fuel carb related, is your fuel filtered? Either your running to lean or crud in carb.
  3. S

    J30JRSIE 30 hp Outboard - Carb Question

    Take the air box cover off, with the engine off, put it to full throttle and send us a picture of the inside of the carb. (Butter fly valve)
  4. S

    Johnson Outboard Motor MODEL NO J30PL4SD 4 Stroke 30Hps Stalls after 20 minute use, then restarts after waiting 5 minutes

    Well, I would shoot the head with an IR gun when it refuses to start.
  5. S

    1977 Johnson 140 can’t turn over

    What is your voltage at the starter when jumping it? I believe, if I'm remembering this correctly, it shouldn't be less than 10.2 volts.
  6. S

    25hp evinrude outboard

    I don't think that an 80ish outboard.
  7. S

    2013 Etec Steering Question

    For more proof, here is the swivel assembly for that motor. Standard tilt tube is clearly shown.
  8. S

    2013 Etec Steering Question

    It's a gen 1. You say Evinrude mechanic....there really isn't any. Evinrude is shut down. There is former mechanics and they are honoring warrantees and making parts so I guess that's what they mean. I purchased a 2009 in 2011 so there can be a discrepancy and it came with a 5 year warranty...
  9. S

    1977 Johnson 140 can’t turn over

    Dry motor with no lubrication? When you had it apart was the exhaust completely clear? Mud dobbers or something?
  10. S

    1977 Johnson 140 can’t turn over

    Sounds like your motor had more than a spruce up. With all the plugs out can you perform a compression test?
  11. S

    2013 Etec Steering Question

    "installed in 2021" "warrantee until 2027" "mechanic" This does not sound like a 2013 outboard. The Gen 2 had issues with their integrated steering system. I'm thinking maybe you haven't properly identified this motor.
  12. S

    2013 Etec Steering Question

    If it's a 2013 then it's a g1 so it's just a normal steering cable or hydraulic system. Most likely it's a stuck cable and it very common. Slide hammer, heat or whatever, it wouldn't be something that would stop me from buying a motor....just might help in negotiating a price. What's does he...
  13. S

    Intermittent spark on 1976 35 HP Evinrude

    This motor probably still needs something fixed. Keep running her.
  14. S

    J30JRSIE 30 hp Outboard - Carb Question

    Simple answer is "no"
  15. S

    J30JRSIE 30 hp Outboard - Carb Question

    Just an orifice....so not sure, guess would be for another application or a cleaning function. Plug it up and see how she runs....be sure to clean your plugs first. Good luck
  16. S

    J30JRSIE 30 hp Outboard - Carb Question

    Looks like your missing part number 9 https://www.marineengine.com/parts/johnson-evinrude-parts.php?year=2001&hp=30&model=J30JRSIE&manufacturer=Johnson&section=CARBURETOR
  17. S

    96 johnson 150

    Thanks for the correction....what about the hole Race talks about.
  18. S

    96 johnson 150

    Electric fuel pump is not needed. Pump on the primer ball when testing and if it clears up then replace fuel pump. Fuel pump works on pulses from the crank case. No vacuum in there. (Piston skirts)
  19. S

    96 johnson 150

    I've heard of the lower compression commercial motors....rebuilt one at 105? Id question that but thanks for educating me.
  20. S

    Bad Miss

    I agree, clean carb....I have 4 of these motors. You can try to backflush the carb but taking it off is better. Could be the lean sneeze that Racerone is talking about....easy to test.
Top