Search results

  1. nola mike

    alpha 1 gen 1 outdrive issue

    Hey, @newtoboat101 You caused quite a stir last year after running your drive in a tub instead of muffs. Did that fry your impeller?
  2. nola mike

    Where can I find the oil filter?

    Yes, you need to raise the front of your engine
  3. nola mike

    Alpha1 Gen1 Does Not Engage FWD or REV

    The guy before you didn't do any maintenance either. Sucks throwing in the towel in June, swapping in a new drive is easy if you can find one. Once the gears grenaded that thickened up the oil. Didn't have time to fully circulate. Conventional wisdom is that your lower is now contaminated and...
  4. nola mike

    Fire extinguisher system

    That looks more like a standard CEL and generic warning at the helm rather than fume detector
  5. nola mike

    Where can I find the oil filter?

    Uneven witness marks, but we don't know which way is up
  6. nola mike

    water in engine, is it salvageable?

    Idk, tough to assess the block based on those pics. You need to clean out those cylinders at least to see how much rust is there. Head for sure needs addressed, and at least test exhaust components. If getting on the water >> worth more than your time, you can roll the dice. Maybe you can bring...
  7. nola mike

    letting in water around motor

    Or rotten transom. But don't be stupid on this one. That boat is 100% not useable until fixed.
  8. nola mike

    Mercrusier MC 1 outdrive

    Here, fixed that for you 😉
  9. nola mike

    Where can I find the oil filter?

    I'm probably in the minority that I just use a hammer... But you already got one off
  10. nola mike

    Alpha1 Gen1 Does Not Engage FWD or REV

    Not being completely empty =/= full. That drive gear oil looks original to the boat. If this boat is new to you, you need to do all of the maintenance that's been ignored. A new SEI drive is your quickest way back on the water, or something off CL if you can find it
  11. nola mike

    Where can I find the oil filter?

    Ha, didn't know you did the pontoon seat refit as well. Remote oil filter was the best thing I did when I swapped engines. Gotta put in some ball valves for winterizing, and it will almost be as easy to maintain as a 470 :)
  12. nola mike

    Alpha1 Gen1 Does Not Engage FWD or REV

    No... That cable is just a continuity wire, nothing to do with your issue. Agree with @kenny nunez and @dubs283 that the overheat + not getting into gear would suspect shredding gears, broken outdrive driveshaft or spun engine coupler. 1. I'm not real clear on what happens when you activate the...
  13. nola mike

    1990 Wellcraft 223 Eclipse

    Wondering if anyone has replaced a curved glass windshield with flat glass. I bet a whole custom flat glass windshield would cost less than 1 piece of curved glass specific to that boat.
  14. nola mike

    Where can I find the oil filter?

    Looks like it's going to suck to access
  15. nola mike

    Alpha One Gen 1 - Can't get 6" on shift cable adjustment

    He's got one of them fancy keeper things on there
  16. nola mike

    Black flakes

    How about from the shiny previously black motor mounts that are missing paint?
  17. nola mike

    1997 Mercruiser 5.7 EFI blown head gasket

    Whoops yeah you're right, compression on #1. But if he's putting air into 3 and 5 at that point their intake valves might not be closed.
  18. nola mike

    1997 Mercruiser 5.7 EFI blown head gasket

    Whoa... You're either on compression OR exhaust stroke on #1. Not necessarily on 3 and/or 5. Without looking, certainly possible you have open intake valves on those cylinders, so your test might be wrong Edit: and yes, that's the timing mark on the composite cover
  19. nola mike

    Early EZ Shift outdrive questions

    I think I was wrong on which bolt we were talking about... Was this one of the middle bolts or the lower?
  20. nola mike

    Removing Castle Nut or Retainer Ring on a Mercruiser Alpha One Gen One Sterndrive.

    I thought you found the problem in the upper? Yeah, definitely pressure test before you get too deep in the weeds
Top