Search results

  1. M

    Fuel Tank Contamination (for your information)

    Exactly what he said ^^^^
  2. M

    1998 Trophy 1802 w/ Force 120 - No gauges working

    considering all of the electrical work you've already done tracing the wires from the gauges to switched 12v should be easy.
  3. M

    Questions regarding tow vehicle

    How does your truck stop with all of the towing weight?
  4. M

    Yamaha F150 Speedo Tube Disconnected?

    Is a speedo worth all of the work it will take to fix it? You may as well replace the water pump if you're to remove the lower unit.
  5. M

    Control Panel diagram

    Can you trace the wire going to the button? Is there something that should run or turn on that isn't? Can you post a picture of the panel and button.
  6. M

    fuel restriction issue 2000 johnson 150 ocean pro

    Double Ditto on plugged vent
  7. M

    Hydraulic steering hose leak

    I don't know if my experience is the same as yours and hopefully others will chime in. When I had my boat re powered the tech had to used some kind of a vacuum to fill the steering system with fluid and remove the air. Not something I'd be able to DIY.
  8. M

    Running my boat on Land

    Post a few close up pictures of the lower units. Is this your boat?
  9. M

    Atwood float switch issue

    The float should move freely without grease. Is the float mounted level? Is the water level and float raised as high as when you manually raise it and turns the pump on?
  10. M

    Transom protector

    get a transom saver.
  11. M

    Loose wire identification and nav light help

    Could the hot wire be going to the switch for the lights? Are the nav lights the only things not working?
  12. M

    Yamaha 2.5hp 4-strk , impeller came apart - inside engine now ?

    Was there water flow before replacing the impeller? Are you referring to the pisser when not having water flow? You need to take another look at the impeller to make sure it's installed right and maybe run a wire thru the pisser tube. Are you running the motor on muffs or it a tank. If in a tank...
  13. M

    Help with a funny engine noise.

    can you post a video?
  14. M

    Getting leaf stains off fiberglass.

    This link may help you. https://forums.iboats.com/threads/transom-browning.747616/
  15. M

    Hot Water Flow from a Yamaha 25hp

    be sure to let us know what happens, hopefully the flush fixes the problem, good luck.
  16. M

    Boat Wouldnt

    Good advice above. What are you using that you measured 12 v? I'd connect a digital voltmeter to the battery to measure the voltage while cranking the motor depending on what you find then move meter to starter and repeat.
  17. M

    Hot Water Flow from a Yamaha 25hp

    Are you able to run the motor in a tank with something to descale? https://forums.iboats.com/threads/descaling-outboards-cooling-systems.747048/
  18. M

    Bladders insert for fuel tank leak

    I'm sure your leaky tank has baffles in it, no way can you insert a bladder in it. I say your friend is full of fumes.
  19. M

    Leak from garboard plug

    I've never tried it but for a tempy fix in an emergency I've heard people use the wax from a toilet seal to plug a leak. I'm guessing you'd need to apply it from the outside of the leaking area.
  20. M

    Outboard Lock Recommendations?

    While I was searching for the best lock for my e bike I learned one thing. There is no good lock, people are using cordless angle grinders to cut thru any cable, chain or lock.
Top