Search results

  1. Sea Rider

    2000 m25c3 25hp 2 stroke flywheel

    Yep flywheels are darn expensive, 70 HP magnets could be bit larger/wider than the 25 HP ones ? other issue is how to remove properly without breaking them. Search for a Tohatsu M30A4 second hand flywheel, both 25 and 30 HP shares same. Happy Boating
  2. Sea Rider

    75hp Suzuki running hot

    That's a 36 year oldie, seems an electric failure, any component heats up, shorts, stops the motor and once has cooled will start and idle good to miss again shortly. A water pump issue will trigger the temp sensor and lessen the rpm if having one , but should not turn a motor off, an electric...
  3. Sea Rider

    90hp Nissian won't open up

    You've ordered the whole Coil Plate Assy. Will need a flywheel puller to pop out the flywheel. When assembling back don't forget to install the large key inside the upper crankshaft's dent and match the flywheel's internal dent to it. Torque nut to specs. If the Coil Plate Assy it's the...
  4. Sea Rider

    8hp starts but runs only at high rpms

    A suggestion, take advantage to remove all salt and carbon build ups on the entire crankcase specially if the motor was running on salt water. Will need to buy new head, head cover, exhaust and base gaskets as well... Happy Boating
  5. Sea Rider

    Honda bf50 spark and carb issues

    It's extremely important that you have mentioned having salty issues at both sides so expect to have same on the entire water passages, there's been some knifing going on with one that thinks that Honda motors are state of the art manufactured and never gets salted nor retain salt in various...
  6. Sea Rider

    Dual Exciter Coil Installation.-

    Would like to install a double Exciter Coil under the flywheel, the reason is that have 2, and old and a much newer one, the idea is to connect the newer one to the CDI once the older gets shot at sea, need to go asap to terra firme remove the flywheel and lose precious boating fun time doing...
  7. Sea Rider

    Replacement Cap for Older Leafield A7 Valves? (old avons, etc.)

    Sorry don't know, don't work with Leafild pressure valves... Happy Boating
  8. Sea Rider

    Highfield?

    Know the factory well, nice products at affordable prices compared to other reputed way pricey traditional Rib manufacturers. What's the fabric material French Orca Hypalon or German Melher ? Plan powering with which HP and brand motor ? Happy Boating
  9. Sea Rider

    Suzuki 140 1995 Outboard Spark Plugs

    With NGK spark plugs the higher the number the colder it is, there's as much as +,- 150 C temp variation on the combustion chamber if increasing or decreasing the plug number.. Happy Boating
  10. Sea Rider

    20 hp Mariner No spark

    Probably will need to purchase a rectifier to work witht the charging coil and stabilize the output voltage to 12-14 volts DC ? Happy Boating
  11. Sea Rider

    Replacement Cap for Older Leafield A7 Valves? (old avons, etc.)

    You're welcome. https://www.nrs.com/search/?q=leafield+caps Happy Boating
  12. Sea Rider

    20 hp Mariner No spark

    Not necessarily, there are motors with installed charing units without a starter motor, just charges the battery you power your marine toys with. Happy Boating
  13. Sea Rider

    Replacement Cap for Older Leafield A7 Valves? (old avons, etc.)

    Check defenderdotcom if happens to be sold individually and readily available... Happy Boating
  14. Sea Rider

    2004 Tohatsu 6 hp 4 stroke,Can't get lower unit back on...

    The only things that will surely see with a flashlight is the water pick up tube and the round middle leg path where the drive gear passes by on its way up to have intercourse with the lower crankshaft. Paul is right it's a matter of feel along turning the flywheel CW while pushing the lower leg...
  15. Sea Rider

    Using hose flush to cool engine.

    If flushing through the flushing port with motor Off, assume the water hose must have a high pressure outlet for the thermo to open up, if not the cylinder head area won't be conveniently flushed, right ? Happy Boating
  16. Sea Rider

    2004 Tohatsu 6 hp 4 stroke,Can't get lower unit back on...

    When the drive shaft has stopped going any further in, rotate the flywheel CW with hand and the shaft will slide easy peachy all the way in. Don't forget to grease the upper drive shaft's splines well in advance before insertion... Happy Boating
  17. Sea Rider

    15hp johnson problems starting after winter

    If after cleaning the carb to an immaculate state the motor keeps dying at idle or speed seems it's an electrical related issues. Just in case, remove the Ignition Coil's ground cable that bolts to the lower crankcase, bend it back and forth, if found too easy to bend with minimum restriction...
  18. Sea Rider

    Lund Rebel 1650 Leaking

    Fill the boat with water to a certain level and don't tilt the trailer, while resting parallel to a road, driveway check if possible to get under the hull and detect any water leak. If tilting the trailer will cancel other possible water leaks spots to check around middle to bow areas. Other...
  19. Sea Rider

    New Yamaha 8hp

    Could that be due to the clamps themselves are vibrating once secured tight onto the rubber patches, try to adjust both clamps ears to face each other, secure tight with a rope. The motor has a bolt side of the swivel bracket that increases/decreases the steering load, if too loose the motor...
  20. Sea Rider

    Flush cooling system 71 25hp Johnson?

    Fresh or salt water use ? Does the motor have a dedicated flushing port in the crankcase ? Flushing the whole crankcase will be good to go for. Remove thermo, bolt cap back on, flush the motor on muffs, barrel for as long as you want, once done remove cap, install new thermo, bolt cap back on...
Top