Search results

  1. pvanv

    Will the lower unit off of a nissan ns25c3 work on a nissan ns25b

    Maybe. YMMV. No info on that old B model. Sorry.
  2. pvanv

    NS8B shift shaft o-ring and bushing replacement

    There is a bushing with both inner and outer o rings. The inner can be tricky to do. We usually re-seal the complete LU when doing this.
  3. pvanv

    Low Compression Top Cylinder NS25C3

    Gasket from China? I wouldn't...
  4. pvanv

    Tohatsu 2-stroke impeller

    BTW, the impeller will flip into proper orientation as the motor runs.
  5. pvanv

    Help! Tohatsu MFS4/5/6 oil leak

    If the lower seals are not installed correctly with the spacer, all bets are off.
  6. pvanv

    NS25C3 Dieing in Gear

    Verify idle speed and mixture.
  7. pvanv

    Looking for a Tohatsu M5A service manual ?

    Ancient unit. Best as a display, not a running motor...
  8. pvanv

    Tohatsu 20 HP EFI

    Tachometer pole settings: TLDI: All models: 4-pole setting 4-Strokes: 8/9.8hp: 6 pole setting 9.9hp to 30hp: 12 pole setting 40hp to 250 hp : 4 pole setting 2-Strokes: up to 40C: 4 pole setting 40D~90A: 6 pole setting 115~140: 12 pole setting
  9. pvanv

    compression issue

    Could be a lot of things. Do a leak down test and check by cranking as matt suggested.
  10. pvanv

    Ns90a idiot mistake

    Definitely check the fuse.
  11. pvanv

    Tohatsu 55 HP Impeller Help

    I have a reprint of the 55B Factory service manual. PM me for more info.
  12. pvanv

    Popping and shaking

    I have never had any luck with seafoam, which is basically just mineral spirits. Yes, set idle speed correctly, then ajjust mixture, then readjust idle speed. repeat a few times, then set mixture about 1/8 turn richer for stability.
  13. pvanv

    Tohatsu 9.8 remote steering conversion

    You need an RC box, throttle and shift cables, the SRC kit, and the hook plate and drag link. No real kits. I would suggest you get help from an outboard guy.
  14. pvanv

    NS40C Water flow

    You can also ck temp with an IR thermometer.
  15. pvanv

    2004 Tohatsu 30

    Is it and MFS30A or B? Year is irrelevant.
  16. pvanv

    2016 Tohatsu 20 issues

    OK, model is critical; year is irrelevant. Is it an MFS20D? That's carbureted. The E series is EFI.
  17. pvanv

    No spark

    Nope. Verify no issues with the kill switch circuit. Also should not start in gear.
  18. pvanv

    Nissan 25 hp length short or long?

    Yes. Japanese motors are 2 or 3 inches longer than the old standard. It's a short.
  19. pvanv

    30 hp four stroke Tohatsu

    What is the model? Older models had carbs. If EFI, what is the fuel rail pressure? Is there spark signal from the ECU?
Top