Search results

  1. JimS123

    Price

    "It ran perfect the last time we used it"
  2. JimS123

    Price

    Look up the published value on one of the sites like NADA for boats. That is a starting point to tell you what its worth. I am assuming that the $10k price is for a new engine. The boat and its current engine are 25 years old, which is past its service life. IMHO $8k is way to high for a 25...
  3. JimS123

    Kicker on a CC?

    I've had a kicker on every boat I've owned since 1970. They have never used a common fuel system or battery. My current 2 boats had kickers installed before they hit the water the first time. We troll with long lines in the Niagara River and Lake Ontario. 1.8 mph to be exact. The original...
  4. JimS123

    Marine Insurance

    Why? Because I didn't accept a huge rate increase and went with another company?
  5. JimS123

    Marine Insurance

    I had the same agent for about 25 years. He had my boats, cars and house. When I bought my first RV he told me to go elsewhere. He was an Rver as well and said that XX would beat his policy. Then he died. His replacement screwed me, so I went elsewhere. Then I met another guy from the...
  6. JimS123

    Marine Insurance

    My BoatUS covers fines for a little over $1 million. My new Progressive is only up to about $900,000. After signing up for the Progressive for the 'ski, and finding it so cheap, I looked into my auto as well. It's also a significant savings. I have not checked yet if the auto/home discount...
  7. JimS123

    Marine Insurance

    I've had Boat US / Geico for many years now. When I checked they were always the most competitive, plus the almost unlimited towing coverage and zero deductible were additional benefits. I just got my "jetski" insurance renewal and it went up 41%. I have a 820 credit rating and have never had...
  8. JimS123

    What gives with helping people with a problem ?????????????

    My opinion is that most of the "Lost" posters really didn't believe the suggestions, and / or found them too expensive or complicated, and thus never followed up anyway.
  9. JimS123

    Winch replacement suggestions

    Way before straps were invented we used a rope. My boats were always garage kept, nevertheless rope longevity was poor. One year I bought an aftermarket steel cable and the crimped fitting on the hook broke the first time out. Back to rope. A few years later I bought a much larger boat...
  10. JimS123

    Kicker motor mount height

    Some of the new fishing boats (Starcraft in particular) have factory setup kickers, with dual single lever throttle/shift. They are really cool. Most even have power trim on both engines, so you can be lazy and never even leave the driver's seat. But, they also have full time dual steering...
  11. JimS123

    Kicker motor mount height

    I agree a 6 HP is adequate for "trolling", but it may not be big enough for use in an emergency. Based on my past boats, I believe a 9.9 will bring you up to hull speed, so a 20 would not provide any extra benefit and it would be more cumbersome to operate. The picture in post 8 shows a...
  12. JimS123

    What do these knobs do?

    If you want lengthy dissertation on mechanicals, go to the university and get an edumacation. If you simply want to get your boat to run right, follow post #3.
  13. JimS123

    Transom

    We are both OLD. Even though in our middle 70's we still ride a jetski. Not like we stole it, but we do occasional hit 50. With our grey hair we do sometimes get looks. That makes us proud. When we are no longer able to handle it, THEN I'll be depressed. Now we are retired. If the time...
  14. JimS123

    " Prosessing " a donor boat. Best way?

    In our case, having kids increased the amount of boating time. Today, both of our boys have boats of their own. OTOH, in our case Iphones had not been invented yet. If they had been, they would not have been allowed in the boat.
  15. JimS123

    Identify boat trailer please, and conversion to utility trailer

    It's an EZLoader. Based on the pictures showing the deterioration and the physical damage, it's scrap metal. Utility trailers don't cost that much. The money to restore that rusted metal will be more than buying a new one.
  16. JimS123

    Trim and tilt question

    Its not a jack plate. It trims and tilts only, no vertical lift. The pictures were not taken from the correct angle, but it looks like the AV plate is a couple inches above the bottom of the boat.
  17. JimS123

    Transom

    At the ramp before going home, we always wipe the boat down. Once someone told me that when the boat gets old I won't go thru all that trouble. When I told the person that the boat was already 35 years old, they couldn't believe it. The most money I ever spent on a boat is my current new...
  18. JimS123

    Mercury Barb Male / Female Connection

    The female ends are on both ends of the hose. Always open the gas tank cap before disconnecting a hose. I disconnect the hose almost never. I simply fill the tank in the boat from a portable gas can. When we had carburetors we disconnected the motor end after each outing and ran the motor "dry".
  19. JimS123

    its been a sad time the past few weeks.

    Every Winter I go thru the house and pick stuff that was not used in awhile. Throw it in the back of the car and off to the Salvation Army. St. Jude and the SA are the most worthy causes around. For boat related stuff, a curb alert on Marketplace and it'll be gone in a few hours...
  20. JimS123

    Trim and tilt question

    It looks just about right to me. With the motor set back that far on the bracket, it is logical that for optimum performance you would mount it higher. If the hole shot is good and it planed well, simply don't trim it up. If for some reason you WAN'T to trim it up, re-drill the holes in the...
Top