Search results

  1. pvanv

    Shift Problem with Tohatsu M18A 350

    Is the shifter stuck, or does it operate and just not go into gear? is Reverse also out?
  2. pvanv

    NS55B

    Nah. It's more like the old 45A through 70A, both of which are long obsolete as well. If well maintained, the impeller is available, and the rest should continue working until an electrical problem sends it to the scrap heap.
  3. pvanv

    NS55B

    Indeed the 55B is very obsolete. A few bits are available. No wp kits, but the bare impeller is available. A few individual carb parts may still be available, but that's about all.
  4. pvanv

    1988 Nissan 18 HP, want to add a safety Switch (Kill Switch)

    Grounding the brown wire kills ignition.
  5. pvanv

    2003 M40D2 Tilt Trim

    I would go to any good local hydraulic repair place. Kits were never made for those, but the complete pump is still available.
  6. pvanv

    M5B Prop Shaft Housing - Factory Service Manual…

    The M5B is pretty old, so you may need to persuade the housing out. Yes, you need the housing out and pull the prop shaft fwd, then the seals can be driven out with a drift. May as well get a complete LU seal kit and do them all. Don't forget the 2 o-rings for the cam rod.
  7. pvanv

    Power Trim and Tilt Pump

    353771401M POWER TRIM & TILT (II) KIT (FOR F TYPE)-DISCONTINUED Most issues are with the electric motor. Take yours to your favorite auto electric for repairs if that's the case.
  8. pvanv

    Installing Rectifier / 9.8 Nissan NSF9.8A2

    Good point Al, but as you know, working without a manual is difficult. The manuals are available from any dealer.
  9. pvanv

    Installing Rectifier / 9.8 Nissan NSF9.8A2

    Just look at the diagrams in the Factory service manual and all will be clear.
  10. pvanv

    Installing Rectifier / 9.8 Nissan NSF9.8A2

    If your motor is electric start (looks like it), it has an alternator. If not (rope start only), you will need an alternator in addition to the rectifier. Full info is in the Factory service manual, Part #: 003N210561 List Price (MSRP): $43.75, but FWIW, the rectifier is plug-and-play. It mounts...
  11. pvanv

    1986 tohatsu 9.9 carburetor help

    Yep. Old style carb is NLA, and no kits. Some individual bits are available if needed, but I agree with Matt. A good cleaning first.
  12. pvanv

    The 9.8 4Stroke Mercury/Tohatsu motor... is the same block as?

    As always, the motors are made in families. The 2.5 and 3.5 are identical except for the carb. Same for the 4/5/6. Also the 8/9.8. Only difference is the carb. Depending on version, the 9.9 and 15 are similar as well. The new 9.9/15/20e are identical except for flow restrictor and ECU.
  13. pvanv

    Need gauges for 2005 Tohatsu MD50b (TLDI)

    Section 5 of the manual has a complete schematic diagram.
  14. pvanv

    Need gauges for 2005 Tohatsu MD50b (TLDI)

    TACHOMETER - TLDI REMOTE MODELS - BLACK FACE Description Tachometer with 3 warning lights (oil, temperature, battery). Also used for TLDI remote model diagnostics. BLACK face. 3.375 inch (85mm) diameter Manufactured by Faria Instruments exclusively for Tohatsu. Gauge has a chrome bezel and is...
  15. pvanv

    2013 30hp Tohatsu/Nissan EFI wont start weird problem

    MSRP for the ECU for the MFS30B is $1368, but everyone discounts them, sometimes as low as $1K. Currently out of stock in North America.
  16. pvanv

    Nissan 3.5 no propulsion

    See if the shear pin is OK.
  17. pvanv

    First Tohatsu motor 9.9HP

    362060220M TRIGGER COIL-NO LONGER AVAILABLE Contact CDI electronics to see if they can rewind yours.
  18. pvanv

    Stator

    That motot doesn't have a stator. It has an exciter coil and a trigger coil. Diagnose which you might need. 345062220M TRIGGER COIL-NO LONGER AVAIL. 346062210M EXCITER COIL-NO LONGER AVAILABLE Then contact CDI electronics to have yours rewound.
  19. pvanv

    Should water be ejecting?

    And always do a complete water pump kit; not just the impeller.
Top