Search results

  1. J

    Ford 302 spark plug read

    Sorry had my microns mixed up...I have 100 between tank and water separator...and 10 between pump and carb
  2. J

    Ford 302 spark plug read

    What's your take on the plug condition
  3. J

    Ford 302 spark plug read

    I have a feeling we have had this same conversation. Or perhaps with someone else
  4. J

    Ford 302 spark plug read

    Yes I did...it's all been broke in properly and according to the builder.
  5. J

    Ford 302 spark plug read

    There autolite 124. And no idea about heat chart
  6. J

    Ford 302 spark plug read

    Not exactly sure but low...couple hundred probably
  7. J

    Ford 302 spark plug read

    Ok so shall I try cooler plugs?. Bigger jets again?
  8. J

    Ford 302 spark plug read

    Out of curiosity what micron fuel filter should I use. Reason I ask is I've been chasing this lean wot slight ping. I installed a 100 micron I believe it was. Perhaps not enough gas getting through?
  9. J

    Ford 302 spark plug read

    How does this look. This is after I fattened up my jets, metering rods and springs
  10. J

    Mercruiser trim pump issue

    Right o...I'll bleed air out I appreciate the help
  11. J

    Mercruiser trim pump issue

    Gotcha. Yes that's what it's doing so all good. Thanks
  12. J

    Mercruiser trim pump issue

    Good day. I have installed a used trim pump in my 1975 campion boat. It works good aside from these 2 issues. First being when I put it all the way down it comes back up a bit on its own. Second when I'm trimking up or down while under way the alt meter on dash jumps up. Any ideas
  13. J

    Found rotten wood

    I couldn't seem to find a link?
  14. J

    Found rotten wood

    Right...I've become good at yanking that out lol so no biggie there
  15. J

    Found rotten wood

    It's wet yes and also some dry rot...I will get more pics
  16. J

    Found rotten wood

    So remove outdrive and transom assembly and cut my way in?
  17. J

    Found rotten wood

    As I was installing a swim grid I found on one side of my transom rotten wood were my tie down hook is( wich was loose). I can access the wood from the inside to do the repair. The outside fiberglass of the transom is solid. Here is a pic from inside boat...any suggestions appreciate
  18. J

    Removing trim hose block

    Sxm is the drive
  19. J

    Removing trim hose block

    Posting for another ...here's a pic of what he is trying to get off...any help appreciated the junction box assembly
  20. J

    Ford 302 spark plug read

    It was an almost brand new carb...used 3 times they said. It was spotless and not a mark on it so. Oddly enough though it didn't even smell like gas. Anyways between the 3 things I did it finally fricken worked.
Top