Search results

  1. J

    Ford 302 alternator proper amp size

    Also my amp gauge is pinned full...and oil gauge was not staying were it normally does...bouncy type deal
  2. J

    Ford 302 alternator proper amp size

    It's a very belt and has the exciter wire to coil
  3. J

    Ford 302 alternator proper amp size

    I believe my alt has died...or is very close...it's old and I want to replace it .not sure what to buy as in amperage...I have a petronix igniter 2 distributor and only run a fishfinder for the most part...I took it out today and it ran rough. I don't believe it's putting out enough juice. Not...
  4. J

    Ford 302 50 amp wiring

    Well it's both...but I understand now thank you
  5. J

    Ford 302 50 amp wiring

    My diagram in manual shows one wire to power side of starter solinoid
  6. J

    Ford 302 50 amp wiring

    Ok thank you
  7. J

    Ford 302 50 amp wiring

    What i meant by 50 amp was the breaker wiring...there's 2 wires...one says batt..and other terminal says aux....
  8. J

    Ford 302 50 amp wiring

    Sorry I'll send a pic when I get home
  9. J

    Ford 302 50 amp wiring

    One wire to battery and one to wiring harness?...I ask because I have a pic of what looks like one to starter solinoid
  10. J

    Ford 302 thermostat housing

    I've tried finding one and also on here. It seems to be the most elusive part on the planet. I'm done to making one and wondering about the bypass. I will weld one to flange and run a hose from water pump to it...sound right?
  11. J

    Ford 302 thermostat housing

    The issue is also room...the one in diagram is skinney and not like a block like the other
  12. J

    Ford 302 thermostat housing

    It's closed cooling and only has 2 pipes. One for each hose from exhaust manifold
  13. J

    Ford 302 thermostat housing

    Alright...so I cannot find the proper stat housing anywere. I am going to have one made and wondering about the bypass outlet. If I have it put on to the new housing do I just run a hose of a port in the water pump
  14. J

    Rochester 2gv carb gasket.

    Carb gasket replaced and installed back on boat. Still having an issue wich I know is from intake gasket as I sprayed them with brake clean and idle went up...the builder installed the intake...the bolts are tight. Is there supposed to be thread sealant on intake bolts?. I pulled a bolt and...
  15. J

    Rochester 2gv carb gasket.

    O crap sorry....ford 302...roughly 1975..
  16. J

    Rochester 2gv carb gasket.

    There is definitely no tag...that much I know for sure
  17. J

    Rochester 2gv carb gasket.

    Aim me in the vacinity and I'll find it
  18. J

    Rochester 2gv carb gasket.

    Carb serial
  19. J

    Rochester 2gv carb gasket.

    Here's a pic from the builder
  20. J

    Rochester 2gv carb gasket.

    This is what I was given
Top