Search results

  1. L

    Mercruiser 4.3L lift points

    Now I do not know what style the starter is. I saw the previous owner hit the starter with a hammer but softly. How can I there is water or not in the cylinders? Also I did make the connection shining with sand. I will check the starter again, it should come out to bit the flying wheel. If it...
  2. L

    Mercruiser 4.3L lift points

    Did you see the attached video I uploaded before, it runs great. But it failed to start after I run it in the water. Sometime the engine move after I hit the starter with a hammer.
  3. L

    Mercruiser 4.3L lift points

    I cannot start engine any more.. The motor sometime moved and some times cannot move after I tested in the water and there is a click voice from engine, Is the starter bad? the output voltage is 12.64.
  4. L

    How can I troubleshoot the wrong trailer light

    Afer I replaced all the lights in the back end, it works. Do you know what happened?
  5. L

    How can I troubleshoot the wrong trailer light

    The two trailer lights flash when I turn on the left turn light. But it works normal when I turn on the right turn light.
  6. L

    Mercruiser 4.3L lift points

    Yes. I think so. there are 6 cylinders for this engine and it releases more heat than 4 cylinders motor.
  7. L

    Mercruiser 4.3L lift points

    The exhaust water is very warm while my engine runs. Is it normal or not? The temp shows only 50 ceis but it is at least 80.
  8. L

    Mercruiser 4.3L lift points

    Water is very warm and it is slow. I did grab some iron rust off in the water pipeline
  9. L

    Mercruiser 4.3L lift points

    The water is warm and seems too slow to come out while running motor. Any solution?
  10. L

    Power tilt failed to pull the outdrive up

    I have solved this issue and I found the connector to hydraulic pump was loosen and it works after I put it back. thank you a lot
  11. L

    Power tilt failed to pull the outdrive up

    Yesterday I found that my power tilt failed to push my outdrive up. But it can make the outdrive down. Which part should be replaced? My engine is Mercruiser 2.5L,120HP, year is 1989. Thank you
  12. L

    Can the base of engine work? Two to bolts under engine are rusted and can

    The power tilt cannot work correctly. It can let outdrive down but cannot pull the outdrive up. Which part is bad?
  13. L

    Mercruiser 4.3L lift points

    I am concerned that the old alignment bar was damaged and it will damage the coupler if I apply to do the alignment job. so I bought one. But the new alignment bar cannot go through the gimmbal bearing. I am trying to do the alignment from gimbal bearing to engine. My old alignment bar can be...
  14. L

    Mercruiser 4.3L lift points

    Today I got a new alignment bar, But I cannot push it into my gimbal bearing even the diameter is 1.3820 inches. and The old alignment bar is 1.3740. So the old one can be pushed through the gimbal bearing.
  15. L

    Mercruiser 4.3L lift points

    The alignment bar can be pushed into couupler after I filed some high spot at the end of alignment bar. Thank you Scott06 so much
  16. L

    Mercruiser 4.3L lift points

    It seems that I need not replace the coupler. The alignment bar worked before . You can see the obvious damaged edge in the second picture. I will buy another alignment bar
  17. L

    Mercruiser 4.3L lift points

    It seems that I need not replace the coupler. The alignment tools worked before . You can see the obvious damaged edge in the second picture. I will buy another alignment bar
  18. L

    Mercruiser 4.3L lift points

    It seems that the gimbal bearing installation tools touched the coupler during the installation of gimbal bearing, the alignment tools cannot be pushed into coupler and I pushed the tools very hard and the alignment tools was broken. So I doubted coupler was damaged by me while mounting the...
  19. L

    Mercruiser 4.3L lift points

    I have found another lift point at the top. is two lift point enough?
  20. L

    Mercruiser 4.3L lift points

    Can following lift straps work or not? (This synthetic nylon sling boasts a capacity of 4,800 lb basket, 2,400 lb vertical and 1,920 choker for a variety of hoisting and lifting applications. ) https://www.princessauto.com/en/1-in-x-4-ft-lifting-sling-with-end-loops/product/PA0008480170
Top