Search results

  1. LaqueRatt

    Evinrude Fastwin 18 No Full Tilt Lock

    Was looking things over yesterday. A transom saver, one of those arm things, would have to be like 5' long with a 45 in it to reach from motor to trailer so I'm thinking this isn't really going to work. It's just a long way under the trailer to anything to brace it to. How does the broomstick...
  2. LaqueRatt

    Evinrude Fastwin 18 No Full Tilt Lock

    All good points. I need to think about this. For now I'll leave it down as I'm only a block from the lake, but going further I'll need to do something. That friction adjustment sounds familiar. I'll have to see if have one of those.
  3. LaqueRatt

    Quit on the Water!

    That all seemed OK. Have clear lines, could see gas in them. Even if fuel pump dies it should run if you pump bulb, right? The fuel line looks new, but seems soft to me. Shouldn't fuel line have lettering on it? I'm thinking maybe when it gets hot under the cover the soft line gets even softer...
  4. LaqueRatt

    Quit on the Water!

    Well my fun day was a short one. Recently got done working on my 65 Fastwin and it seemed to be running great. Started on one pull, idled nice, accelerated smoothly. First time with a new motor I was going pretty slowly trying to stay on the end of the lake were the ramp is. After about 10 mins...
  5. LaqueRatt

    Evinrude Fastwin 18 No Full Tilt Lock

    I have 11" of clearance under the motor when it's not tilted and when locked down it's rock solid. Should be OK, right?
  6. LaqueRatt

    Evinrude Fastwin 18 No Full Tilt Lock

    Thanks F_R, I was going crazy trying to figure out why I couldn't find a lock or even something that looked broken. Seems odd that the motor doesn't lock into position. Makes it pretty much un-trailerable, no? I'm only a half mile from the ramp though so doubt if it matters too much. I did not...
  7. LaqueRatt

    Evinrude Fastwin 18 No Full Tilt Lock

    The piece just doesn't feel right. It moves around too easily. Guess maybe it's not a problem it it's just for remote control. That's a really good idea about the transom saver. Is this something I can make myself or should I buy one? Currently on the backburner after the motor conked out on me...
  8. LaqueRatt

    Evinrude Fastwin 18 No Full Tilt Lock

    Think something must be broken or missing. I can't for the life of me figure out how to lock the motor in the full tilt position for trailering. It will lock into the down position using the lever in the front, but not up. There is a part on the starboard side that I can't figure out what it...
  9. LaqueRatt

    Depth Adjustment

    Thanks for the reply. Sure wish this thing wasn't so tall. It's like it was built for a much bigger boat. Currently mulling over the idea of shortening the shaft. Be more useful if it was about a foot shorter.
  10. LaqueRatt

    Depth Adjustment

    Recently bought a boat with a Prowler T55/40 (I think) trolling motor. From what I'm seeing online it's not the greatest motor, but it seems to be in working condition. On my Mirro Craft, with the prop just a little below the bottom of the boat, the handle is way up in the air and awkward...
  11. LaqueRatt

    Plastic Tanks are All Junk

    That's an interesting idea embedding a metal fitting. I think they make brass reducer bushings that might be just the ticket for this. If my repair fails I'll look into this for sure. As to plastic welding, that's basically what I do with the glue gun. It's not a crafts gun, it's a HD Sears...
  12. LaqueRatt

    Restoring McCulloch 14HP

    Thanks for the picture. At least now I know what I'm looking for. That looks like an emblem to me, but mine doesn't have any mounting holes so I suspect it orginally came with a sticker. Likely a Sears sticker as it was sold by Sears. I just think the McCulloch name is cool, Sears, not so much...
  13. LaqueRatt

    Plastic Tanks are All Junk

    Something curious about my tank is that there are about twice as many female threads in the tank compared to the fitting. Seems to me if the elbow was a little longer it would be much more resistant to stripping and popping a thread. It's not been in the water or seen any use yet, but it sat all...
  14. LaqueRatt

    Restoring McCulloch 14HP

    I posted under Other Outboard Brands and got no responses, so I posted here and it got moved. Now I have two posts that are almost identical there. Since I'm wanting to restore an old engine, this forum seems like the best one. Am I wrong? Sorry if not following the rules, but I don't see a...
  15. LaqueRatt

    Restoring McCulloch 14HP

    Looking to purdy up this old gem. Got her running nice, but she looks mighty plain with scuffed up whitish paint and no emblems/stickers. Looking for a paint code or something off the shelf that is a decent match and a source for decals or emblems. Prefer McCulloch, but I guess the Sears logo...
  16. LaqueRatt

    Plastic Tanks are All Junk

    Yes this was likely owner induced, but not this owner, the last one. Ended up using hot melt glue, as it's supposedly unaffected by gas. Also it dries quickly, unlike JB Weld. Put a nice coating on the threads, then quickly snugged it back up to the point where it usually seals. Went around the...
  17. LaqueRatt

    Plastic Tanks are All Junk

    Yep as portable as 40 lbs of gasoline is to lug around. LOL I have 4 Permatex products on hand. Trying to decide what my best bet is: Anaerobic Gasket Maker Ultra Blue Hylomar HFP #2 Form A Gasket Sealer It shouldn't take much it's just seeping a little bit. I also have JB Weld, but a bit iffy...
  18. LaqueRatt

    Plastic Tanks are All Junk

    Is this true? Picked up a Mirro Craft with a Seasense tank. Soon found it was a leaker. Fixed the leak in the fuel line, but the plastic elbow going in the top is stripped. It'll get pretty snug and then not leak, but soon it pops up a thread and starts seeping all over again. Think part of the...
  19. LaqueRatt

    Restoring McCulloch 14HP

    Could you point me in the right direction? I've looked around a little and not found much for this motor. A paint code or a close match would be great. I found a site that sells stickers for outboards, but they didn't have anything for McCulloch.
  20. LaqueRatt

    Restoring McCulloch 14HP

    Does anybody else think their outboard looks a bit beat up and want to paint and re-badge it? I recently brought a cool old outboard back from the dead, but it looks pretty plain. I'd like to spiff it up some. I can paint and do bodywork, so that's not an issue. I just don't know what color this...
Top