Search results

  1. P

    Stupid me, no oil

    My machinist actually peened in a stainless ball into that hole for that reason... think he said if that starts leaking I'll have bigger problems to worry about or something.
  2. P

    My 84 4winns horizon 195 project.

    Today is a short day... Glassed in the floor for the fuel tank and test fit the bulkheads for it. We're going to see a show so I'm taking it easy for the rest of the day. Cleaned up the mess in the garage... Calm day.
  3. P

    My 84 4winns horizon 195 project.

    So I've been thinking about this... this is the bow area where it would rub if beached. I have a very bright light underneath. The area is just starting to rub through the gelcoat. I don't beach it often as I typically need too much to float at most beach spots so I anchor out. One ramp without...
  4. P

    My 84 4winns horizon 195 project.

    Yesterday was one of those days I spent all day there, however didn't feel like I accomplished much... Basically I test fit the transom assembly and finished clearanceing for the steering arm, measured for the mounts and glassed them in and finished the deck tabbing. I also chased the rest of...
  5. P

    Stupid me, no oil

    If it is the intake rail that only tends to leak when running harder. The vette wouldn't leak at all until it got up to 3500 rpms and stayed there for a few seconds. Figured it out in the driveway running. There ain't too many places to leak back there.
  6. P

    Cam for 96 5.7

    For stock parts absolutely. There's some really nice high end parts out there too but summit reboxes and tells you that you are getting morel 7717 for one of their lifters. Iirc it comes to like 14$ a pop... cheap insurance for a quality part. I want to say it's the 217 model. They're considered...
  7. P

    Tips On Replacing Starter

    The nice thing about a direct drive starter is they're easily rebuildable. Thing that sucks about them is you usually have to rebuild them sooner or later. :LOL: As far as the peanut starters go (PMGR, dad liked calling them peanut starters for whatever reason) they typically last a lot longer...
  8. P

    Cam for 96 5.7

    I personally like the morel 7717s as far as oe style lifters go... the cheaper ones I've watched come apart on well... stock builds post 2020 so I can't say I trust even the GM replacements anymore. FYI, SBC gen 1 and standard ls/lt lifters are interchangeable if you use the factory roller 350...
  9. P

    My 84 4winns horizon 195 project.

    Makes the lay ups go faster too!
  10. P

    My 84 4winns horizon 195 project.

    No upholstery lol. Just leaving it all gelcoat for now. :ROFLMAO:
  11. P

    My 84 4winns horizon 195 project.

    I've been following along your thread too. You're not doing too bad yourself! And yeah the heat is killer. It's not as bad up here as other parts of the country but 100-102 F in the garage is no joke no matter what. Couple that with the asthma and I look like a mess at all times lol. My...
  12. P

    My 84 4winns horizon 195 project.

    It's been a project. Sucks I lost the month I couldn't glass because I'd probably be floating right now but oh well. It goes quick even when you don't think it is. And thank you!
  13. P

    My 84 4winns horizon 195 project.

    Today's progress... while it doesn't look like a lot... it's a lot. I put in nearly 12 hours along with the miscellaneous bull crap that pops up during the day. I'm hot. I'm tired. I gotta be up in 6 hours for work so I'm going to bed now. So I was talking to a few people and came up with my...
  14. P

    My 84 4winns horizon 195 project.

    It was just a skim to bring it back to deck level and fill the pin holes... still tacky when I stated glassing so all good. I've got some glass on the deck but I'm sitting in the a/c... its 106 in the garage and the fumes are killing me at the moment.
  15. P

    My 84 4winns horizon 195 project.

    My loose skim coat which was mainly resin with a little cabosil. Since the main bonding agent had milled fibers in it I'm fine with just using a little cabosil thickened resin to plug the holes.
  16. P

    My 84 4winns horizon 195 project.

    Had a busy day but got a lot of bs done. Strips on tank per how the manufacturer wants it done, gimbal ring installed, deck ground flat. I noticed on a couple plugs I have some pin holes. I plan today to mix up a loose batch of peanut butter to fill those voids before glassing.
  17. P

    Process for changing boat trailers?

    If blocking it on the transom does cause strain... Well then I really messed up by gutting it lol. This is more or less how every marina I've been to does it. The larger boats typically get railroad timbers supporting the keel and wedges on the transom edges to stabilize it like a cradle...
  18. P

    My 84 4winns horizon 195 project.

    Didn't do a ton but was able to grind the deck clean and glass in some of the plugs. I'm off next on Monday so I'll hopefully get some more done then. There does seem to be a light nearing the end of the tunnel though.
  19. P

    My 84 4winns horizon 195 project.

    I picked up my fuel tank.... again... but the vent is properly located. And I ran the boat today.
  20. P

    My 84 4winns horizon 195 project.

    While I have you all here... my false floor up by the cabin. I cut it tight to the hull to the point I had to tap it to fit in place... will this cause any issues with hard spots and cracking or should I just send it?
Top