Search results

  1. alldodge

    2005 4.3 liter Mercruiser ignition trouble

    Opinion, everybody has one We are not being told everything, the OP is trying to tell us what the readings are, "but" he either doesn't know or doesn't know how to get the true readings Things do not add up, and we are here to help, but we need real info to help
  2. alldodge

    Amana Fridge

    The issue is the Fridge is not defrosting but I'm unable to find a defrost timer or heating element in the parts break down. Model = AFB2534DEB Labor day is the time to buy appliances and that's what we're going to do, but still would like to fix the issue. I takes about a month for the...
  3. alldodge

    454 mag mpi chuggles/stalls

    Glad to hear your running, but have issue with the cause
  4. alldodge

    RPM after serpentine belt change

    The belt has nothing to do with the Tach and so long as the tensioner is working correctly their are no adjustments
  5. alldodge

    2005 4.3 liter Mercruiser ignition trouble

    Move purple wire to I connection
  6. alldodge

    Mercruiser 409 engine severe vibration issue

    Merc is replacing things at no cost to you?
  7. alldodge

    Cool Fuel 3 Module Water Channels

    The CF3 is just the next generation to help stop vapor lock and in this case make more money for Merc The reason I say to make more money is for the same motor but one which has the Alpha drive, Merc still installs the Gen 2 and spin on fuel filter. Both designs produce 43 psi, just the Gen 3...
  8. alldodge

    2005 4.3 liter Mercruiser ignition trouble

    Correctly I don't see how the kill switch is the problem because you said The purple is not getting power so it's currently not the kill switch
  9. alldodge

    2005 4.3 liter Mercruiser ignition trouble

    Purple on I
  10. alldodge

    2005 4.3 liter Mercruiser ignition trouble

    Including when the key is turned to start? If correct Post a pic of the back of the key switch with wires on it
  11. alldodge

    Mercruiser 3.0 won't "lock in"

    I think you might be getting the shift bracket distance from the cable length distance You screw the tube in as far as it will go, than tighten the nut down
  12. alldodge

    Mercruiser 3.0 won't "lock in"

    VIDEO links The vids will show how to adjust cable. If you are unable to get it to work both ways consistently than the lower cable most likely needs to be replaced
  13. alldodge

    A couple more I/O questions...

    I'm unable to make out the numbers on the box but looks like a TBV ignition module The hoses are there so that any blow by gets sucked into the motor via the flame arrestor
  14. alldodge

    Mercruiser 409 engine severe vibration issue

    Did you swap a 409 for a 409, or another motor to a 409?
  15. alldodge

    Hot water heater

    Don't see any issue with the setup at the water heater. I'll go back to in post 2, think the hot/cold lines are swapped/mixed up All other faucets work correctly, only the helm one has the issue. Follow the line into the boat and see which line its connected
  16. alldodge

    LOWER END OIL CHANGE

    I'll never use a impact to install
  17. alldodge

    Mercruiser 4.3 TKS - No Ignition Power

    That fuse should be the TKS fuse
  18. alldodge

    Lower unit oil leak through weep hole after impeller replacement

    SO your saying the splines are wet with lube at top of shaft, down to on top the pump housing?
  19. alldodge

    What year is this Johnson?

    Closed please read our rules
  20. alldodge

    anc switch.

    ANC = Anchor light
Top