Search results

  1. M

    Fuel System Delivery Issue Mystery HELP

    Sounds like great news! Got my fingers crossed for you.
  2. M

    Fuel System Delivery Issue Mystery HELP

    Great! You're getting closer to fixing this. Thank you for trying to stay safe. I think your tech is proposing a visual inspection of the VST. They probably have more experience with this style of motor, so I won't go against their recommendation. I don't think this will do any harm because...
  3. M

    Fuel System Delivery Issue Mystery HELP

    There are no stupid questions. One of my biggest problems posting on forums is skipping things that I see as common sense, What I forget is that they aren't common sense, they were taught to me soo long ago that I have forgotten that learning experience. Yes it needs to be under load, that...
  4. M

    Fuel System Delivery Issue Mystery HELP

    OH, please be careful. Working around a running engine with the cowl off is dangerous on its own. Working on one running across the water even more so. We try to avoid this as much as possible. My suggestions, in order of safety. 1. in a test tank 2. on a dyno 3. secured to a trailer and backed...
  5. M

    A question for Mercury outboard techs

    Hey Scott, That would be great. I would be very interested in what your contacts have to say, I called Mercury consumer tech support today. Was told that the "manual is the manual". But that running a storage mix thru an outboard wouldn't hurt and would be better for the engine. "just don't skip...
  6. M

    Fuel System Delivery Issue Mystery HELP

    "but the needle started shaking and it dropped off when it began "the issue". Shaking can be normal on some engines, but should be looked into. Dropping off is something that needs to be looked into. The tech did note on my invoice after I brought it in the second time (when it began giving...
  7. M

    A question for Mercury outboard techs

    Fogging a newer 4 stroke EFI engine I've been retired from the boat business for awhile and never did a lot of outboards, but we always ran them on a storage mixture for layup. I was looking at a owners manual for a newer outboard and see Mercury doesn't recommend this on outboards. Here is...
  8. M

    How does guardian mode work?

    You didn't give a serial number so because this can be different for different models and years, I can just give this general advice from a owners manual. ENGINE GUARDIAN SYSTEM The Engine Guardian system monitors the critical sensors on the engine for any early indications of problems. Engine...
  9. M

    Fuel System Delivery Issue Mystery HELP

    The next steps are to determine if the engine not wanting to run above 1/2 throttle is due to engine guardian or fuel issues. First things to do are considered the "basics". 1. Visual inspection, looking for any fuel leaks, looking for loose fasteners - especially any electrical ground or power...
  10. M

    Fuel System Delivery Issue Mystery HELP

    The slow down and increase in engine speed could be fuel or it could be the ECM going into guardian mode. This is where the scan tool or warning horn would tell if the ECM is cutting back RPM until the problem goes away and then repeating the cycle. The ECM doesn't monitor the fuel pressure.
  11. M

    Fuel System Delivery Issue Mystery HELP

    I was typing during your reply. The single beep is important. Very. Please check. Pumping the bulb and having it help might mean that you could skip the scan tool and start with the 2 fuel gauges.
  12. M

    Fuel System Delivery Issue Mystery HELP

    When you replaced the low pressure fuel pump, was it because testing said it was bad or just guessing? Did you use a Mercury Marine pump from a authorized dealer or off of a place like amazon? Do you have a Mercury Marine authorized dealer near you? Preferably one on the water or close by...
  13. M

    Fuel System Delivery Issue Mystery HELP

    The status of the motor is that it now starts and runs fine up to 1/2 throttle, but starts to surge over 1/2 throttle? Pumping the bulb doesn't help? No warning horn when this happens? Do you still get the single beep when you turn the key on?
  14. M

    Volvo Penta Trim Cylinder issue

    I missed that you are already looking at the cost between the kit and complete pump. At $300 I would recommend the complete pump.
  15. M

    Volvo Penta Trim Cylinder issue

    The people trying to help are getting confused, You have a different system then they are familiar with. Your trim pump is outside the boat on the transom shield. Your pump only has up and down outlets. It doesn't care or even know about the port or starboard rams. Fluid comes from the same...
  16. M

    Continuing Problem with 2021 VP 250 hp 4.3 DI

    Your welcome, I enjoy helping when I can. Please keep us updated to the finial resolution. I would also recommend you do another set of recordings once everything is shipshape, they could come in very handy down the river. Plus I would sure like to see them. Be very interested what happens with...
  17. M

    Continuing Problem with 2021 VP 250 hp 4.3 DI

    Your boat, your money and time. You're there and I'm not, I'll try to help as much as I can. If replacing #2 plug got you back to WOT --- that's great! You were smart to stop with #4 and #6, one of the rules in troubleshooting is --- try not to add any new problems. You do need to change them...
  18. M

    Continuing Problem with 2021 VP 250 hp 4.3 DI

    Hi Dave, Files like these don't do much. There isn't a baseline files showing the transition from not running to running. The next files aren't consistent enough from file to file, some of the files don't even reach WOT, so don't really tell much. There is some information that is available...
  19. M

    Continuing Problem with 2021 VP 250 hp 4.3 DI

    couple of other thoughts for you I would call your dealer and ask about Vodia 5. It could be in your best interests to go to someone with Vodia 5, I have questions about the software in your ECM. The misfire counter reset issue, the lack of freeze frame data on active codes and some other stuff...
  20. M

    Finding out if 8.1 Engine is HO or Base?

    It was built 09/26/2003 By MerCruiser as a base engine and installed shortly later in a 1986/7 St.Tropez If I remember back then the cam and throttle body were bigger, and different software in the PCM,
Top