Search results

  1. Fun Times

    How to Winterize: risers specifically

    Engine part number 8M0136295 comes with Factory Fresh Water Cooling System that protects the engine block and exhaust manifolds. So with that the risers are raw water cooled only and if you live in an area that gets pretty below freezing often and for long periods of time, your safest bet would...
  2. Fun Times

    Year help please.

    MERCURY Serial # 0B261937 = 1988 70-H.P ELPTO Model# 1070412BD 70/75/80/90 HP (3 CYLINDER))
  3. Fun Times

    2005 5.0 GXI revs up on cold start

    Hi there, As a test on your next cold engine start up, 'Before "Cranking" the engine over, first try cycling the ignition key to the on position for a few seconds which should allow the fuel pumps to turn on to prime the fuel system up, then repeat the ignition power up cycle one more time again...
  4. Fun Times

    Sticky links are mis-directed

    Unfortunately most every sticky seems to be "missed placed" throughout the forum via direct link. And truth be told we could use some additional help in finding them again. They are still online someplace and there's a few general ways of trying to relocate them should you happen to be sort of...
  5. Fun Times

    Mercury 60HP 1990 valve type bearing reeds????? WHAT?

    Merc manual part # 90-86135--5 / 1-593 Covers engines: 45 & 50 (4 Cylinder) 50 & 60 (3 Cylinder, 2 Carburetor) AND 70 (3 Cylinder, 2 Carburetor) (U) 4576237 and Above (A) 8042650 and Above (B) 9136250 and Above (C) 7088598 and Above (U) 4571652 thru 6428681 (A) 8042350 thru 8074512...
  6. Fun Times

    Bravo 3 oil fill siezed

    An impact screwdriver with a little bit of heat ought to help you get it out before it becomes to late. https://www.harborfreight.com/impact-screwdriver-set-with-case-37530.html Product Overview Break loose rusty or frozen screws and bolts with ease using this hard-hitting impact screwdriver...
  7. Fun Times

    Where to get a manual?

    Serial number 232070 comes up as an 1991 MARINER SANSHIN IN 30-H.P. (M) Model Number 7030201YW Your -8- is actually an "S" which ='s Short Shaft. https://www.crowleymarine.com/mercury-outboard/495.cfm?mdl=P2N5BJ 90-84681--1 / 2-1091 Covers engines - 20C (6A9)/25C (695)/W25 (695) /30A (689)/...
  8. Fun Times

    Where to get a manual?

    Post up the engine serial number as it may help locate a manual or OEM part number to buy one, etc..
  9. Fun Times

    Gaurdian mode when engine is warmed up

    Since it wasn't mention it would leave me to wonder if you've also inspected the check ball valves located down at the exhaust as they may have an effect to the back_flow theory...Item numbers 23 - 26, https://www.mercruiserparts.com/bam/subassembly/31758/15323/170 Can't for sure tell by the...
  10. Fun Times

    Missing photos on a 2011 post

    There's one trick that's usually sort of helpful to at least see the photos/images still even if they are removed from sight of a web_site forum such as iboats for example or even places like eBay if needed. Since you know the title of the thread or maybe you happen to even be looking for one...
  11. Fun Times

    Bravo 3X repair

    Should you happen to have to order any parts it will be much more helpful to know your full serial number as with doing a general info search with the info provided seems to show you have what Mercruiser considers a Diesel stern drive which ought to have slightly different internal components vs...
  12. Fun Times

    Anyone near Frenso CA that ships heavy stuff??

    Hey A_D, on another boating forum I play on too based generally for the CA/AZ area is a guy with the username shippingguy from the CA area and had been a long term member there since Oct 3, 2007 and everyone that used him only had good to say over the years...He may be worth the call for this...
  13. Fun Times

    Deleting Posts

    Yes I happen to know it's an option by xenforo and it's up to the hosts to turn it on or off....I'm pretty sure it's turned off here though especially if you can not seem to located it in any of YOUR post/thread "tool" options usually found in a drop_down icon box maybe with an down arrow or the...
  14. Fun Times

    Deleting Posts

    I believe it's set up here on iboats that only the mod's can "delete" the post or thread.....If you still see the edit button icon, you could remove the contents of the post and title too and maybe say please delete in the title so one of sees it. Or best/quickest way would be to either report...
  15. Fun Times

    Cupped washer on Prop shaft

    Further looking and reading over the notes available, it seems you'd have to use the cupped washer with an old different? designed propeller along with a different type of thrust washer for that type of prop. Mercap Thrust hub 45451A1 & Includes washer cupped 12-35965 MerCruiser 45451A1 45451A2...
  16. Fun Times

    Cupped washer on Prop shaft

    I believe that may be Mercruisers version of being a prop shaft seal protector for fishing lines getting caught up between the prop and gear case housing...If fishing line gets wrapped around the shaft it could cut into the oil seal and you'd lose the gear lube oil. Volvo Penta calls it a...
  17. Fun Times

    Part number help needed

    Your serial number will start off with a 0G vs DG.... So more of an 0G??422? as there are 8 in a full serial number. Somewhere on one of the welch plugs on the engine block may be a plug with the serial number stamped into it as seen in the following link for an example...
  18. Fun Times

    Volvo Penta Throttle Only Button

    Sounds like you may have an issue inside your Volvo Penta Control Mechanism which will be the part bolted to the back side of the controller. Typically the control mechanism would come with a new control but it looks like I was able to find the control mechanism part number for you....Below...
  19. Fun Times

    Serial number

    It should be 0E..... 0E315022 = 120 HP (1998) - 0E288000 THRU 0E344999 , https://www.mercruiserparts.com/120-hp-1998-0e288000-thru-0e344999
  20. Fun Times

    Bravo 3 Sea Water Pump - What's this?

    If room is tighter one the other engine to get at the black quick disconnect fitting then one other trick to consider looking over would be to remove the in-take water hose back at the inlet fitting held on with one clamp then pull the entire hose out with the pump housing...Just remember...
Top