Search results

  1. alldodge

    Fiber Optic Connector Width for Drill Size

    Look forward to hearing this as well My buddy had fiber installed in hi log cabin a couple years ago, I'm still waiting. He said they wanted the box mounted to be just inside where the cable comes in. I didn't ask him what size holes as he didn't drill. It was my understanding as the cable...
  2. alldodge

    2008 Rinker 296 Bowrider Vent Cover

    Rinker is out of business Woops was OoB looks like covid didn't take em out Double woops, had it right the first time. Polaris bought Rinker and stopped making boats
  3. alldodge

    Dieseling after shut off and loud noise when trim is higher in shallow water

    I wasn't thinking you ran the drive out of the water, just maybe it's coming up higher then it should. The trim limit switch on the drive should be adjusted so it only has maybe 30 sum degrees total movement. Meaning from tucked in to trim up. It should then stop moving and only way to get it...
  4. alldodge

    Lower unit

    Welcome Not sure let see if @kenny nunez or @Lou C can help
  5. alldodge

    Volvo penta 5.7 gxi 警報

    Translation Hello everyone! I am from Taiwan. I have a pair of 2003 Volvo Penta 5.7 gxi engines. When I start the engine alone, the alarm will not sound, but when two engines are started, the alarm will sound, whether starting from the left car or the right car. The alarm will sound, but I have...
  6. alldodge

    Dieseling after shut off and loud noise when trim is higher in shallow water

    Welcome Dieseling can be caused by a few things Idle to high Running rich Incorrect timing The last thing a dieseling motor may do before stopping is run backwards. This can be really bad for a motor in the water. The water can be sucked up the exhaust and into the heads. Check the list...
  7. alldodge

    6 year anniversary of quitting smoking, yay me!!!

    Everyone is different need to find a way that will work for you. The largest part as we all know is mental, you have to want to quit, it's a drug My method was keep telling myself these things will not have control of me, and was about a week of 2 puffs when things got real bad. I waited til...
  8. alldodge

    Need RPM’s on 383MPI 1970 SeaRay 24’ project

    I should say that if advance is at 34* and as speed increases, if advance reduces then that's the ECM protecting it self. So watching advance should help do you know if fuel pressure is staying at 43 psi?
  9. alldodge

    Need RPM’s on 383MPI 1970 SeaRay 24’ project

    Don't know, never used it, only use a scanner
  10. alldodge

    Need RPM’s on 383MPI 1970 SeaRay 24’ project

    Your looking for error codes not actual advance
  11. alldodge

    Click No Start

    Good catch Show a better pic of wires attached to solenoid
  12. alldodge

    Click No Start

    You have a bad connection, might be the ground cable Fully charged Bat would read 12.7V Reading less then that could mean a meter issue but the starter so energize going from starter post (red wire) to yel/red (solenoid) no matter what
  13. alldodge

    Click No Start

    Bat is dead, starter is or connection is
  14. alldodge

    Click No Start

    With 12+V on the yel/red going to solenoid then starter should energize We're missing something, new starter and motor will crank and start is smacked. Pull the plugs and see if there is any water in the cylinders See if you can turn it over using the belts and pulleys after plugs are out
  15. alldodge

    Click No Start

    Doing nothing means most likely the 90 amp fuse on the starter is blown of some really bad corrosion. Crossing those terminals would engage the starter even with key off. Measure voltage on red/purple wire on the slave and there should be Bat voltage (you said 12.8) If no voltage then check...
  16. alldodge

    Click No Start

    Just to make sure we are talking about the same thing The slave relay is on top the motor which the key energizes when turned to start. The relay sends power down to the starter solenoid on top the starter to energize it You can turn key to ON/Run and jump across the top to large terminals...
  17. alldodge

    Click No Start

    Welcome Did the motor run fine before now and is this a new issue? Lets start with the basics, need a voltmeter Is this a carb or EFI motor? Motor serial numbers are best Are you getting a click at the starter and nothing else or a click somewhere else like the slave relay?
  18. alldodge

    Need RPM’s on 383MPI 1970 SeaRay 24’ project

    If you had a scanner attached to the motor it would tell what is happening. It could be something else is happening along with lean but we just don't know right now If O2 sensors are installed this to will provide good data, but without a means to change, it's not a good choice Sending it to...
  19. alldodge

    Need RPM’s on 383MPI 1970 SeaRay 24’ project

    Again we are just guessing because we have no data (scanner) to compare with
  20. alldodge

    Need RPM’s on 383MPI 1970 SeaRay 24’ project

    The 555 doesn't know the AFR, it just has fuel tables Fuel tables are determined by Merc running the motor with AFR probes in the exhaust under various loads. The tables are built in conjunction with MAP, TPS and Air/Water Temps. Ones the tables have been designed, then based on what the...
Top