Search results

  1. vroom ZOOM

    Sony RM-XM10 swap with RM-X60M

    Hi, the RM-XM10 remotes in my boat are fried. Will the RM-X60M units be plug and play or not? Thanks
  2. vroom ZOOM

    350 MPI hard to start, runs terrible

    Ok, I managed to get the fuel pressure in check at 32 psi with the pump on. I did take the little screen out, and although it looked clear, I blew it out with some brake cleaner and it helped with the fuel pressure. So I guess it was the screen plus the regulator that got the fuel pressure where...
  3. vroom ZOOM

    350 MPI hard to start, runs terrible

    not sure on what you meant by the codes with a tone meter. As I mentioned, I hooked up my diacom laptop and there are no codes shown there (that is the first thing I did). Also when cranking I am getting a good engine speed signal, so the cps should be ok. I also checked for spark with an...
  4. vroom ZOOM

    350 MPI hard to start, runs terrible

    M072758
  5. vroom ZOOM

    350 MPI hard to start, runs terrible

    2001 350 MAG MPI (MEFI 3). This one has me really stumped. Last year, it wouldn't run at all. I replaced all the spark plugs and the distributor cap and rotor, and it fired right up. Come springtime, the engine started right up, but upon acceleration would sputter and blow black smoke. I figured...
  6. vroom ZOOM

    Rinker 282 trailer

    Well, I was reading the replies and remembered what I did in engineering class. Yeah, we used a pixel calculator to get dimensions from three views. I did the same with the boat and figured out the length of the boat that should fit on the trailer. I adjusted my bow stop and drove down to pick...
  7. vroom ZOOM

    Rinker 282 trailer

    Hi, just got a 2005 rinker 282 and need help picking out a trailer. The boat is listed as being 29 feet long. I went ahead and looked at a trailer that was listed as being for a 28 foot boat. Problem was, that when I went to measure it, the distance from the bow stop to the back of the bunks is...
  8. vroom ZOOM

    Outdrive Paint & Prep

    Here is my experience: the alumiprep alodine is generally the best way to go, BUT... Here is what I did last time to paint my seadoo jet pump nozzles (paint stuck really well) 1. Sandblast or clean up the corrosion REALLY well. Brass brushes only, no steel brushes as those could leave metal...
  9. vroom ZOOM

    replacement Chevy engine for volvo penta

    Yes, 100%. I just wanted to be clear in my post to avoid cheap knockoffs, who knows if they are ignition protected. OE GM is fine (they still go bad all the time though, I have fixed a hilarious number of "no start" engines just by swapping out bad crab caps and spark plugs)
  10. vroom ZOOM

    replacement Chevy engine for volvo penta

    I will say something a little different than the replies here and might get hated on, but it might save you some cash. What you have is a "crab cap" distributor, it is a GM HVS distributor. What you could do is go ahead and buy the GM distributor (make sure it is OEM acdelco) and look for a...
  11. vroom ZOOM

    8.1 Gi manifolds

    Hi, quick question. Are the volvo 7.4 and 8.1 manifolds the same? I see them listed for sale as being the same, would just like to confirm here. I bought a boat and I would like to throw in some new manifolds on it for peace of mind. Second question, how hard is it to upgrade the 8.1 from 375...
  12. vroom ZOOM

    help a mercruiser boy figure which volvo drive is needed.

    Hello Considering picking up a project with two volvo XDP drives. I will be getting rid of the XDP drives and transoms, and keeping the engines. No question about it. I want to go to two aluminum volvo duoprop drives. When I search for them, I see a bunch of different drives, such as DP-S...
  13. vroom ZOOM

    yamaha F250 DERATE to F225

    Hello, curious if it is possible to turn a yamaha F250 (3.3L) into a F225. The reason I want to do this is there aren't much F225s around for sale, but quite a few F250s. My boat is only rated for a 225.
  14. vroom ZOOM

    Vinyl ester filler over epoxy and gelcoat questoin

    First question I was trying to find out if I can put vinyl ester filler over fiberglass that I laid up using epoxy resin, not poly resin.
  15. vroom ZOOM

    Vinyl ester filler over epoxy and gelcoat questoin

    just plain white. I guess I will give it a try.
  16. vroom ZOOM

    Vinyl ester filler over epoxy and gelcoat questoin

    Hi, two unrelated questions here for two different seadoos First question is can I use vinyl ester filler over an epoxy fiberglass repair? I have a bunch of the 3M marine filler and I really like how it cures fast and I can sand it and throw another layer on in 20 minutes or so. Epoxy with...
  17. vroom ZOOM

    axius TVM issues

    If its a wire harness damaged by saltwater, then I have had good luck with just repinning all of the connectors to get things working again. You can imagine all the stuff I found in those plugs... Main concern is if there is a defective TVM, that would be the biggest money issue. The...
  18. vroom ZOOM

    Mercruiser 6.2 chirping noise

    Chirping still there when the engine is running with no belt? Is the engine alignment ok? If yes, then pull the oil filter and look for metal.
  19. vroom ZOOM

    axius TVM issues

    @Scott Danforth can you pls move it to the mercruiser section? Forgive my ignorance.
  20. vroom ZOOM

    axius TVM issues

    Damn, I posted in outboards like an idiot. Can someone move the thread to the mercruiser section?
Top