Search results

  1. T

    1963 Johnson 18HP Not Staying in Gear

    It may just be the camera angle but that prop doesn’t look okay from here.
  2. T

    Lower Unit Gear Oil Running Temp ?

    Sounds like you just going to make more problems for yourself. Jmo
  3. T

    1955 evinrude 7.5 hp carb and starting

    In my eyes unless the original points were burned up they would be far better quality than what would get today and would be worth reusing. Condensers are another story when they are done they are done.
  4. T

    Water coming up through carpet

    Yea it’s likely water logged somewhere under there. Some boats have a double hull with a separate drain plug at the stern. Usually a brass plug that unscrews. Do you have one?
  5. T

    Buying a 1989 fisher with a payed off lien on title

    Definitely wait until they get a clear title. If it’s clear they won’t have a problem getting an updated title.
  6. T

    73 50 hp johnson quit, now nothing. Help please

    Did you remove the drain screw at the very bottom to drain the oil or the Philips screw half way up towards the back of the gear case?
  7. T

    How Filters are Made

    I saw a vid not long ago where the WalMart brand filter came out on top. Go figure.
  8. T

    73 50 hp johnson quit, now nothing. Help please

    Can you turn the flywheel by hand?
  9. T

    Outboard in the Lake

    Pull the flywheel spray everything down with Wd40 and blow it dry with air or even a hair dryer if that’s all you have and try again. Get it running asap and let it run for as long as you can to dry out the internal surfaces. Best of luck
  10. T

    Broken Skeg

    Looks good as new. Did you use any resin in glass or just trowel in the job weld?
  11. T

    Which towing position

    I personally would prefer #3 but that would also depend on the terrain I was towing on.
  12. T

    Broken Skeg

    We have a big rock in my local waters that had damaged 100’s of boats. It was finally marked in 2001 after a long battle from a 95 year old man man that hit the rock in 1934. It was on the charts but had no visible marker and it was just under the surface and the size of a car. There are many...
  13. T

    Need help with identifying motor

    Likely normal and just unburnt fuel and oil but check the lower oil anyway and see how it looks. A new to you motor should get a new impeller as well.
  14. T

    Out on the Lake Pictures

    Beautiful boat you have there
  15. T

    Outboard loses prime, unless I stand the tank on end

    I have found that sometimes the tank vents don’t always vent. Try loosening the cap or check the pick up tube inside the tank and see what you get.
  16. T

    18 horsepower 1969 evinrude

    Well water boils at 212 so that’s not good. I think 130 or so is a happy temp
  17. T

    Swap 1978 9.9 hp piston on 1987 9.9 hp powerhead

    Drilling more oil holes is uncharted waters for me but a weight difference would throw everything off balance and would likely cause catastrophic damage. Best
  18. T

    What type fuel hose?

    I hear there Flyingscott. Ever time I read a post that has potentially dangerous info I grit my teeth. Personally I would rather save somewhere else and get a quality fuel line. Both for safety and future problems with internal deterioration of a lot of the stuff that sold these days.
  19. T

    18 horsepower 1969 evinrude

    If you have fuel at the carb but not through it it’s time to revisit the carb. IMO Still doesn’t explain why you’re not at least getting some life when squirting a bit of fuel in the carb. Did you torque the flywheel when you put it back on? Could have sheared the key if not.
  20. T

    Out on the Lake Pictures

    Your a good man Joe The world needs more like you. All the Best
Top