Search results

  1. R

    Engine parts

    This site right here and others.----In Canada---evinrudeparts.ca----Or your local dealer.----Avoid using Amazon " really good deals ) as there have been issues.----Why do you feel you need carburetor kits ?-----What is your motor doing / not doing?----Post the actual results of a compression...
  2. R

    EXCESSIVE smoke…

    Well----The water pump impeller must be SUBMERGED as these pumps are not self priming.-----Launch the boat or get a bigger test bucket !
  3. R

    EXCESSIVE smoke…

    Motor running in a test bucket with water 6" above the impeller ?
  4. R

    battery charging issue has me stumped

    But post #2 suggests testing the battery.-----So here we are.
  5. R

    1975 Johnson 115 v4 won’t idle

    About 120 PSI or more.----Those gaskets have nothing to do with compression in the cylinders.----Does spark jump a gap of 7/16" on all 4 leads using a test device?
  6. R

    1975 Johnson 115 v4 won’t idle

    Correct.---Might need some new gaskets for a few $$ to learn lots.
  7. R

    What starter gear?

    Post #2 seems quite clear I think.
  8. R

    1975 Johnson 115 v4 won’t idle

    You have a cheap gauge or a motor that needs some ( a lot ) of work.-----Remove a few bypass covers ( 6 bolts each ) and look at pistons / rings.
  9. R

    Sound check in Mercury 115

    That motor idles on the top 2 cylinders.----Bottom 2 carburetors kick in at 1800 RPM.
  10. R

    1983 evinrude 115 mystery hose

    ???--Plug that hole.----Plug the wee hole on the forward edge of the gearcase.----Throw the hose away.----Use your phone to see how fast you are going through the waves.
  11. R

    E10RCNS 9.9 1982 evinrude lower unit seal kit

    I know of one shop that is now at $175 / hr ( Canadian funds ) and busy.-----I know of one dealer that has been told by other shops to charge more.----Refuses to do so and is also busy.
  12. R

    E10RCNS 9.9 1982 evinrude lower unit seal kit

    Buying individual seals for this motor adds up.----Do not restrict your search to a 1982 model.-----Lower units kit is common for all years of the 9.9 / 15 HP.-----About $46.99 list price for correct kit.----Fits from 2005 down to 1980 models.----Your local dealer will help you find this correct...
  13. R

    E10RCNS 9.9 1982 evinrude lower unit seal kit

    Sorry ----you have to do a better search.-----Not correct.
  14. R

    2000 70 hp

    Buyer beware!-----There are known issues with cooling on #2 cylinder .
  15. R

    Looking for some help

    Gear oil has nothing to do with the motor running as you describe !!
  16. R

    94 Johnson venom 200 Bogging in forward

    You do not have full power in reverse.-----The prop is turning in water / exhaust and allows it to rev up easily.----Just sounds like it has full power.----Are wires FROM the powerpack going to the right coils ?-----With motor idling pull plug wires off one at a time and listen for change of...
  17. R

    Trim and tilt question

    Post a picture from the SIDE ( prop level ) so that helpful folks can see the position of anti cavitation plate relative to bottom of the boat.
  18. R

    Evinrude 130

    I usually do not assume and think.----I do some simple testing.----But I can not see , hear or touch your motor !!
  19. R

    Evinrude 130

    Pulse limiter removed ?----That pump might be marginal to provide enough fuel.----So have your assistant operate the manual pump and test run.-----And perhaps test run with a portable tank mixed at 50:1.----Motors all run fine on muffs.----Even in gear on the trailer is still neutral, as prop...
  20. R

    Evinrude 130

    Part # of the pump ?
Top