Search results

  1. R

    Replacing transom on aluminum Jon boat

    Remove corner caps.----Remove cap.---Drill out rivets.----Replace the wood.
  2. R

    Evinrude 40hp Water Temp alarm

    So 82 in Fahrenheit or Celsius ?
  3. R

    Evinrude 40hp Water Temp alarm

    Remove lower unit and inspect water pump.----Post the compression values.----Blown head gasket can cause overheating.
  4. R

    first bass boat (Evinrude outboard)

    Post pictures of the cowling.----Start with a compression test on that crossflow !----Post the values here.----These motors are famous for broken rings.-----Motor is 1988 to 94 vintage.----Most parts are the same every year.
  5. R

    1958 seahorse 10 running hot

    Sorry----No thermostat shown for 1958.
  6. R

    1988 Johnson GT150 acceleration issues

    Do not run motor till issues are sorted.----A cylinder starving of fuel starves a cylinder of OIL as well.
  7. R

    1958 seahorse 10 running hot

    I doubt there is a thermostat on a 1958 model10 HP.
  8. R

    1982 Evinrude 90 hp

    Any history on this motor ?-----A compression test is the first thing to do !----Post your numbers here.
  9. R

    1988 Johnson GT150 acceleration issues

    Post the compression test values.----Are the fuel jets ( FIXED ) clean ?----Does spark jump a gap of at least 3/8" on all leads ?-----Flywheel key checked ?----Any history on this motor ?
  10. R

    1958 seahorse 10 running hot

    Was water tube installed in the exhaust housing grommet BEFORE the lower unit was installed ?
  11. R

    4 stroke 50hp 1997 Yamaha outboard black smoke rough runnning

    Possibly an issue with carburetor float/s and float valves.----Too much fuel.
  12. R

    Prop inconsistently spinning in neutral?

    Normal for a prop to turn slowly in neutral.----Has to do with the oil and the way bearings " work " with oil.
  13. R

    Chainsaw cutting lube in a pinch

    Oil keeps bar groove and links from wearing out.
  14. R

    Chainsaw cutting lube in a pinch

    Oil has nothing to do with keeping the chain sharp.
  15. R

    Where would you drill for tell-tale install?

    The picture is post #8 is a 2 cylinder 40 / 45 / 48 / 50 / 60 HP
  16. R

    Decarbonizaton

    Many of those muscle cars used water injection systems.
  17. R

    110 Johnson, sputtering and coughing

    Remove cylinder head on the one with 105 PSI.----Likely it is suffering from broken piston rings.-----Very , very common failure !!
  18. R

    2003 M40D2 Shuts off with Shift

    Drain the gear oil.----Check for spark on each plug lead.
  19. R

    Bought my first boat to cut, gut and rebuild from bow to stern, including engine. Killed my back and suffered the wrath of the fiberglass demons

    Fellow that I know bought a 1937 Pontiac coupe in 1972.----Paid $150 for it.------Worked in TV rental shop ( remember those ) at the time.----He got lots of chuckles when he brought it home and into the car club.------He found a 64 chevy and took everything off it.---He asked questions and dug...
  20. R

    2004 Evinrude 115

    I have a 2005 Yamaha 4 stroke 90 HP.----Got it free as it was tossed out by Mercury dealer.------Had a 1976 Evinrude 15 dropped off yesterday for parts.---Also free.
Top