Search results

  1. S

    1986 6.5 hp

    Maybe you should buy this? https://www.ebay.com/itm/313489198980
  2. S

    Someone knows fersure. Sneezing and idle screw does little

    Getting old and I've lost my memory. What specifically is it not doing right.
  3. S

    Full throttle in reverse little throttle forward

    Well, got a lot on my plate, if you don't get it by 9 pm PST then maybe. Hint though, it has to do with the box or the cables that come out of the box. Think hard on that.
  4. S

    2000 johnson 50 hp fuel pump issues

    Crosby....good one man! I've got a pm for you later and I need some advise. Stay tuned.
  5. S

    Full throttle in reverse little throttle forward

    I could tell you the answer, but Racerone is correct. Your mistake is SO common that you need to learn about your motor. Best of luck.
  6. S

    1986 6.5 hp

    You'll have to wait for some of these old crusty guys to get out of bed to answer this one but I'm pretty sure there's an OMC commercial guide for that motor.
  7. S

    2000 johnson 50 hp fuel pump issues

    And everything is bigger in Texas!!!
  8. S

    Someone knows fersure. Sneezing and idle screw does little

    Hit the wrong reply and have no idea how I did it. Smart phones suck sometimes. "Low speed needle" touche. But a needle is an adjustable jet. Period. In my opinion, those motors can run on 100 to one with Amzoil or tcw 3 oil of any kind. i use Evinrude, mercury or Yamaha twc 3 oil at 75 to...
  9. S

    Someone knows fersure. Sneezing and idle screw does little

    Linc and sinc is how you set up the carb before you even start it. LOTS of info on that. Getting it done correctly is the thing and then you tune in the low speed jet. So "yes" he's correct 1/4 to 1/2 inches past the two marks keeps mine from falling off.
  10. S

    Someone knows fersure. Sneezing and idle screw does little

    You don't have much but your on the right track. Here's the answers because I'm tired. Linc and sinc....look that up. That's the two words that matter. Service bulletin. That does not fix a cough or sneeze, just a hesitation or the motor quits when you start out. Then it's carb tuning...
  11. S

    Why would an outboard Mechanic?

    I hear you. As to the heli-coil, you're not sure you even need it. So in regards to that, let me tell you what you're up against. First you want to get anything away from you you can't be in the way at least as far as outboard parts wise. Then you need to use some penetrating oil and everybody...
  12. S

    Why would an outboard Mechanic?

    Or just run it if it runs fine. Not sure how old or what size it is. Personally, I'd go confront the guy unless you got what you paid for....always a slippery slope.
  13. S

    Someone knows fersure. Sneezing and idle screw does little

    Get a book....a good book.
  14. S

    Broke an Exhaust Manifold Cover Bolt ...... HELP

    Do not repost old threads....a big "NoNo" Start your own and explain that you've been reading.....
  15. S

    2000 johnson 50 hp fuel pump issues

    Rebuild the vro pump. 3 nipples, isn't that interesting!😜
  16. S

    Leaking lower unit?

    I'm going with Vic on this one but what the heck always fun to learn.
  17. S

    1996 Johnson 25 HP long shaft J25RLEDA, sounds like its sucking air and dying

    You must have one of those "saltwater models" 😉
  18. S

    Someone knows fersure. Sneezing and idle screw does little

    Ooooo, poop. This one does not respect the force. Let yourself go....find the two words, then find the service bulletin about the two marks. Joy will come. I wonder if joy is "Hot" Is it a cough/sneeze? Or does it fall on its face for a second as you pull away? (That's a hint)
  19. S

    Flywheel and throttle cam plate moving together

    Acid wash....trust me. 😆 Disclosure, Saltchuckmatt is not responsible for any caustic burns, dead plants, Superfund cleanup or any other liability for forum advice....also, any acid erections lasting over 4 hours immediately get to your wife or girlfriend!
  20. S

    Flywheel and throttle cam plate moving together

    Now paint it up and polish it good and hang it on the wall where it deserves to be. Don't you think it needs to be put out to stud? Put one of those little Asian girls next to it! By the way your brickwork needs a little muriatic acid. 😉
Top