Search results

  1. T

    J50PLSTD miss fire over 3000RPM Idles fine. Compression is good

    Do you have thermostats installed or have they been removed ?
  2. T

    91’ Evinrude 25 not pumping water

    Definitely change the water pump or a least the impeller. If you don’t have compressed air try a hose and a piece of wire if needed and clean out the water tubes. Check the water intake screen on the lower could be plugged up with a mud dobber nest or something like that. If you can get in it a...
  3. T

    91’ Evinrude 25 not pumping water

    Try blowing compressed air into the water tubes while you have the lower unit off. Any chance you were running in mud or fine sand? Has the motor lived in salt or fresh water?
  4. T

    1954 Evinrude Shaft Length Question

    Yea a jack plate would also give you at least 5” of set back as well. That would be a very uncomfortable set up.
  5. T

    9.9 evinrude wont idle

    Sorry for my confusion I see know that there is another post mixed in here that is not your motor.
  6. T

    91’ Evinrude 25 not pumping water

    Is there water at the pee hose? Where you running on muffs in a barrel or in the water?
  7. T

    9.9 evinrude wont idle

    It would be to late to just change tanks if water is already in the bowel. My thought is if motor runs fine other than just at idle when its level there may be a small amount of water in the bowel being picked up when the motor is level. Tilting the motor would move the water away from the...
  8. T

    9.9 evinrude wont idle

    If changing the angle of your motor makes a difference then check your gas tank. You may have water in it.
  9. T

    Evinrude Control Box Issue

    Have you Googled panel mount controls?
  10. T

    35 hp Evinrude

    Hey Doug The starter bracket is headed your way USPS. They said it should get to you in 2 days. Take Care Tim
  11. T

    Johnson Add on electric start

    I don’t think it would have any effect on your adjustment. You still have the same distance from the backside of the bracket to the stator. Maybe the threads were damaged at the start of the so they cut it back rather than retapping the threads.
  12. T

    Johnson Add on electric start

    Looks like that was cut out. Maybe the the end of the adjustment screw was messed up and needed to be shortened.
  13. T

    35 hp Evinrude

    Ok I will take the starter off to save on weight as it will be coming from Massachusetts. I will just put my address in the box and the postage will be on the box so when you get it just send me the money order. A hurricane is headed my way tonight and tomorrow so weather permitting I will...
  14. T

    35 hp Evinrude

    What year is your motor? I have a starter and bracket from an 1985 30hp. Not sure if the starter works. it just a parts motor that I have had laying around. If your interested I could send it your way and you can just send me the postage.
  15. T

    1966 johnson 6hp not running on both cylinders and intermittent spark

    Maybe check you ground connections. they need to be clean and tight. just a thought.
  16. T

    35 hp Evinrude

    Some food for thought. I added a starter to my 02 Johnson 40. My starter bolted right into the the block but some motors will need a bracket. I didn’t have a charging system or deep pockets so I just found a spot for the solenoid and called it a day. I use a solar panel to keep the battery...
  17. T

    1993 tracker pro deep v16

    Agreed with the above. You really only need to push the key for cold starts. By pushing the key you activate the choke. Once it’s warmed up pushing the key will only flood the motor. Try just starting with out the choke and if it won’t fire then push the key. Enjoy
  18. T

    short shaft or longshaft how do i measure my 1979 johnson 35 h p

    I’m sorry but I can’t believe this conversation is still going on. I don’t see that Limy is even in on this topic anymore. Limy is probably out fishing and you guys are still arguing. 😂
  19. T

    New points not gapping, 1957 Johnson 35hp Javelin

    I could be wrong but looking at the adjustment screw if it were turned counter clockwise it may open the points.
  20. T

    New points not gapping, 1957 Johnson 35hp Javelin

    What made you change the points in the first place? Was there a problem? a photo would be helpful as well.
Top