Search results

  1. alldodge

    Bought a new long block and wondering about the coupling and gimbal bearing.

    Agree with Bondo inspect it, the coupler will last forever if taken care of
  2. alldodge

    2006 Volvo 5.7 osi-d crank no start

    The SBC is one full turn after zero lash. Manuals 24 and 31 Never did understand why the SBC is that way and the BBC is tighten to torque
  3. alldodge

    Sea Hunt New Boat Delivery

    Ask the dealer you bought it form
  4. alldodge

    Really strange sound on start up - Mercruiser 3.0

    Might be the starter solenoid springing back disengaging
  5. alldodge

    Really strange sound on start up - Mercruiser 3.0

    Don't know, might help to hear more then a couple seconds
  6. alldodge

    Buying a boat

    If the motor and Trans is in good shape its a solid boat. They were fairly well made and will last, if taken care of.. Its rough riding to just cruise around on. Doesn't have much of a keel for smoothness
  7. alldodge

    Wiring harness for 5.7GiF

    If the mechanic knows there is a short, why not just fix the short? Wires are wires, just fix the issue and should be good to go This is a GI wiring
  8. alldodge

    Buying a boat

    In its day its a competition Salomon ski boat Unless you like to Ski with no wake why would you buy it?
  9. alldodge

    2008 3.0L thermostat housing sensors

    Correct on the first 2 Item 2 for Buzzer Item 24 for gauge Item 15 for is the TKS temp switch, which is part of the TKS carb control https://www.mercruiserparts.com/bam/subassembly/30908/13603/150 Also looks like you need a thermostat housing
  10. alldodge

    Mercruiser 3.0 - Block rust

    If you have not seen water, then it might have been just a bad paint job.
  11. alldodge

    Mercruiser inboard 4.3 - how to refit missing water heater (boiler)?

    Would help to know the serial number of the motor, and if its closed or open cool. This is one way
  12. alldodge

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    Red
  13. alldodge

    4.3 MPI Possible ECM issues

    The outputs are analog
  14. alldodge

    Honda BF15D will not stay running (Purchased Used)

    Not an OB guy, but seeing a bit of fuel on the water would not be surprising with a motor not running right. If its not burning all the fuel, as in flooding Look in to the carb, see if the fuel pump is working fuel pump
  15. alldodge

    Closed cooling diagram

    Yes, but most don't and I'm old. So my mistake and my fault
  16. alldodge

    4.3 MPI Possible ECM issues

    WOuld like to know if it changes any during the cycle. If the 5V circuit goes below 5V then it can throw all kinds of problems within the ECM. One bad sensor drawing to much current can throw things off
  17. alldodge

    4.3 MPI Possible ECM issues

    Something is overloading/overheating and tripping. While I'm all for watching real data, just don't see how you have enough time to see data to determine what is happening currently. Measure the 12V and 5V readings to see if they change any during the cycle. It may very well be the ECM but...
  18. alldodge

    4.3 MPI Possible ECM issues

    Has distributor cap been replaced?
  19. alldodge

    4.3 MPI Possible ECM issues

    If your saying FP now stays running when motor is running, or it still cycles on/off?
  20. alldodge

    Seadoo jet boat stalling

    The VIN is actually a HIN (hull ID number) but doesn't help with the motor Do see some gunk but not a lot
Top