Search results

  1. alldodge

    Mercruiser 3.0 Fuel Issues

    There has to be one
  2. alldodge

    Mercruiser 3.0 Fuel Issues

    Need clarification There needs to be a tube that goes down to the bottom of the fuel tank. If the fitting is removed and there is no tube, then check the tube is not part of the tank. If there is no tube which goes to the bottom of the tank then that is a problem Antisiphon valve
  3. alldodge

    Mercruiser 3.0 Fuel Issues

    Good deal If you have a regular marine fuel pump which is motor driven off the side of the block, would like to know which one. Don't remember if you gave us your serial number, but some pumps need 2 gaskets to keep the pressure down to 7 psi or less With it emptying, need the pump type model...
  4. alldodge

    Mercruiser 3.0 Fuel Issues

    A mechanical pump doesn't have much suction. Also pumps are mounted at or below fuel tank exit fitting What kind of pump is in pic? What is the other item?
  5. alldodge

    Old ford 302 no spark

    If the smug mark by the pin is zero, and the intake valve had closed prior to bringing it around the last 180* then looks great
  6. alldodge

    Old ford 302 no spark

    Remove starboard valve cover, then rotate motor until #1 intake valve closes and piston comes to the top
  7. alldodge

    Old ford 302 no spark

    Where the rotor is pointing is not that much of an issue, so long as the firing order is correct. It pointing 180* out (or backwards) just means instead of it being on #1 compression, its on #1 exhaust stroke
  8. alldodge

    1996 5.7 mercruiser Digital ignition gm not starting

    Thanks for the SN, looks like you have TBI, MEFI-1 ECM and EST igntion No problem with providing more info, its just it was all one paragraph. Just trying to read it was a bit hard due to structure Check your fuel pressure, is it 30 psi? If you have a NOID light (or can get use of one), could...
  9. alldodge

    Old ford 302 no spark

    Need to remember you have a Ford and not a GM. Number 1 cylinder on a Ford is front starboard side
  10. alldodge

    1996 5.7 mercruiser Digital ignition gm not starting

    Need a motor serial number? Also try breaking up your comment into shorter statements to make it easier to read Being a 96 it probably has a TBV ignition. Here is the troubleshooting guide
  11. alldodge

    Mercruiser 3.0 Fuel Issues

    Most likely the float needs to be reset. The bouncing around can do that to it in transit
  12. alldodge

    2002 Mercruiser 4.3L MPI Fuel Pump Style

    The 0M number is the serial number, and your correct 861156A1 is the pump part number. Just search on it and it will show several that will work The pump can pressurize more then 42psi but the regulator (item 13) which is attached to the cooler keeps the pressure constant. The noise might be...
  13. alldodge

    Im going the wrong way!

    Yes, and should add this doesn't work for the higher gear reduction drives like 2.1 (guessing but could look it it)
  14. alldodge

    Old ford 302 no spark

    It should be dead on it. When a timing light is used, the pointer aligns up with the additional marks on the balancer. There are other marks with numbers. Your looking for 6 or 8* BTDC when running
  15. alldodge

    Blue Sea Add a Battery

    I have only one installed on one side. If something happens it will blow, and I'm using a breaker I also charge the start bat first because the house is not used that much. Would rather make sure its charged over the house. That said if I used the house side more, and had more then one house...
  16. alldodge

    Old ford 302 no spark

    This is for a 140 but the wiring is the same
  17. alldodge

    Old ford 302 no spark

    Its the same color purple
  18. alldodge

    Propane BBQ Grill Repair question

    Can use any manifold so long as it fits and is similar BTU. Wouldn't want to use one higher BTU then designed but doing a little less wouldn't hurt.
  19. alldodge

    Blue Sea Add a Battery

    It looks ok Your setting it up to charge the house Bats first
Top