Search results

  1. alldodge

    Windows 11 yes/no?

    The things I would worry about mainly switching over is my current suite of software. Word Perfect office 12 and MS Office 07 and older sets and so far work fine, but looks like MS wants us to go to rent your SW
  2. alldodge

    No Clue Engine

    Casting number list 10114182...454.......91-up...4-bolt, Gen.V The motor has been replaced and looks like a double oil filter system isn't bad. Looks like it was done pretty well. If you remove a valve cover we could figure out what heads Would use manual 16 for block and carb, and Delco EST...
  3. alldodge

    4.3 Chevy

    Your guy is a parts changer. Replaced exhaust before knowing what the problem is. If there was no running issue until the water intrusion, then its not a head gasket. Most likely its bearings and/or cylinder walls are rusted. If this is the case, the motor can be overhauled for not a lot more...
  4. alldodge

    Mercruiser 5.7 Horizon Draining Issues

    Serial number? Pic of your seacock and water hose routing?
  5. alldodge

    Old ford 302 no spark

    Must like spending money Why get new springs if you don't know if the dizzy is advancing or not. If it is then how much No need for new damper but could use some $5 timing tape while you figure out what is and is not working
  6. alldodge

    Old ford 302 no spark

    Never thought much of Petronix but if that's what ya want Don't need the dual point ones. Also, if your not getting advance then these will not help. Need to find out if your dizzy is advancing by watching it as rpm increases with timing light...
  7. alldodge

    Re-upholstery Job on Cruisers Yacht 338 Bowrider

    No thoughts of just designing with an all out one of a kind pattern? With Boltaflex being the best, what about going back with it?
  8. alldodge

    Frozen Prop on SX-M Duoprop, Seeking Advice

    Put a torch in that area
  9. alldodge

    Frozen Prop on SX-M Duoprop, Seeking Advice

    Suggest get a pipe which slides over the inner shaft down to the outer shaft
  10. alldodge

    MerCruiser 7.4L Bluewater Exhaust

    Manual 16 list only one gasket per side
  11. alldodge

    Frozen Prop on SX-M Duoprop, Seeking Advice

    Edit: Have to take that back. The DP doesn't appear to have a center hub, its solid SS same as B3. The item inside the splined shaft is the inner prop shaft seal The puller has to be pressing against the splined shaft and the prop. My thought is your puller is pressing against the center...
  12. alldodge

    Frozen Prop on SX-M Duoprop, Seeking Advice

    Have not messed with VP DP. My B3 has is solid with no hub. Yours is probably rubber, so when heating it may catch fire. I would not use a sledge. Keep the heat on and a hose or extinguisher near by
  13. alldodge

    Frozen Prop on SX-M Duoprop, Seeking Advice

    Maybe @Rick Stephens , @Bondo @muc @kenny nunez might have some ideas, but I'm thinking heat will be needed, and housing will also need. Disassembly because of heat, and inability to apply force removing the prop on the outer shaft only. The heat will probably damage the seals
  14. alldodge

    Volvo Penta EVC tachometer LCD

    Unable to find anything about it. What is the part number of the top assembly?
  15. alldodge

    Windows 11 yes/no?

    I'll only do it when I have to on home computer. Still thing 7 is best
  16. alldodge

    MerCruiser 7.4L Bluewater Exhaust

    Don't know any other way to check the elbows other then to remove. If the gasket is in good shape on the AF side then the mans should be fine. As for getting to the pump, I feel your pain. I have to hang up side down to get at mine. The exhaust man gasket cost about $30 for a set. So for...
  17. alldodge

    Lost our best fishing buddy

    I sort of have always taken the easier way out by always having two. Unable to remember when I didn't have a buddy other then in the 70's when in the USCG. The easy way is to always have two, one old and one young. When the old one goes, the younger one helps get ya past it. Then get a pup...
  18. alldodge

    Mercruiser 3.0 Fuel Issues

    No need for new thread unless you want to get maybe more input, and nothing wrong with more input If this happens when the motor is cold but not when warmed up, then its the choke, and it needs adjusted If it happens all the time at low idle, then its mixer screws and/or float settings
  19. alldodge

    Lost our best fishing buddy

    Until you get another buddy, this will continue. Everywhere I look I see Tigger, next to the bed, the chair, in my lap, out in the shop, just everywhere. I'm trying for the first time to see if I can get by without a buddy, and so far its not working very well
  20. alldodge

    Mercruiser 3.0 Fuel Issues

    Agree
Top